AeroCool Spectro 12 FRGB Molex Fan 120 mm - ACF3-NA10217.11

This is a 120 mm case fan AeroCool Spectro 12 FRGB with Molex power supply – a budget solution for additional airflow and a bit of color in your case. It operates at relatively low 1000 RPM, which in combination with a noise level of only 19.6 dBA makes it quite quiet for everyday use. The hydraulic bearing and MTBF of 60000 hours mean decent reliability for long-term operation. Fixed RGB lighting adds style without you having to deal with software or additional controllers.

What you get: a fan with size 120 x 120 x 25 mm, which easily fits into most ATX and mATX cases, powered directly via Molex – convenient if you don't have free fan headers on the motherboard. At 3.6 W consumption and 0.3 A at 12 V, you can connect it safely to the power supply without overloading it. The maximum static pressure of 1.31 mmH2O is fully sufficient for general case airflow, especially in the front or rear panel. The added anti-vibration pads and curved blades help keep the noise low and the airflow more efficient, without annoying vibrations on the chassis.

• Size 120 x 120 x 25 mm – standard format that fits into almost any modern case for front, rear, or top mounting.
• RPM 1000 – lower RPM for quieter operation, suitable for office and gaming configurations without extreme overclocking.
• Noise level 19.6 dBA – the fan remains discreet even during long gaming or work sessions.
• Max. pressure 1.31 mmH2O – stable airflow for standard airflow through mesh panels and filters.
• Hydraulic bearing – longer life and less noise compared to ordinary sleeve bearings, with MTBF up to 60000 hours.
• Fixed RGB lighting – constant RGB style without the need for an additional controller or software.
• Molex connector – direct connection to the power supply, convenient when there are no free fan connectors on the motherboard.
• Anti-vibration pads and curved blades – reduced vibrations and more efficient cooling at a low noise level.

Suitable for budget and mid-range configurations where you want to improve airflow and the case's appearance with minimal cost and effort. A good choice for a front intake or rear exhaust fan, especially if you use a standard gaming setup without heavy load and overclocking. It is not the optimal option if you are chasing maximum airflow and fine control of RPM via the motherboard.

The combination of quiet 1000 RPM, hydraulic bearing, Molex power supply, and fixed RGB makes this AeroCool fan a practical solution when you need easy installation, decent cooling, and a bit of color in the case without unnecessary complications.