DeepCool FL12 Black ARGB Fan Pack 3-in-1 3x120mm

The DeepCool FL12 Black ARGB Fan Pack 3-in-1 is a set of three 120 mm fans, aimed at mid-range builds where you seek a balance between cooling, noise levels, and aesthetics. You get the standard 120 x 120 x 25 mm form factor, which fits both cases and radiators, plus addressable RGB for synchronization with the rest of the lighting. The 500–2150 RPM range gives you flexibility – from near-silent idle to serious airflow under load. The black color and ARGB lighting make them easy to integrate into almost any build.

What you get

With a maximum airflow of 55 CFM and static pressure up to 2.82 mmAq, these fans are suitable for both front intake/exhaust and mounting on radiators. With noise levels up to 32 dBA, you can run them at lower speeds for a quieter profile or push them towards the upper limit under heavier loads. The dynamic fluid bearing is a good foundation for long-term operation with less vibration and smoother running. Connection is easy via a 4-pin connector for PWM control on the motherboard and a 3-pin 5V ARGB connector for synchronizing the lighting with other components or a controller. The set of three units is enough to blow air through an entire mid-tower from intake to exhaust.

• A set of 3 x 120 mm fans, sufficient for full airflow in a standard case.
• Size 120 x 120 x 25 mm, compatible with most PC cases and 120 mm radiators.
• A wide range of 500–2150 RPM, allowing a quiet profile for light tasks and aggressive cooling for gaming or rendering.
• Maximum airflow of 55 CFM and static pressure of 2.82 mmAq for more effective blowing through filters and radiators.
• Noise level up to 32 dBA, suitable for gaming and work configurations without turning into a "fan" on your desk.
• Dynamic fluid bearing for smoother operation and lower vibrations in the long run.
• Addressable RGB lighting with a 3-pin 5V ARGB connector and a 4-pin fan connector for full control via the motherboard or a controller.
• Low power consumption – only 1.8 W at 12 V / 0.15 A, which minimally loads the fan headers.
• Black finish, which looks clean and neutral, leaving the ARGB effects as the accent.
• 36-month warranty, providing peace of mind for long-term use.

Who it is suitable for

The FL12 Black ARGB 3-in-1 is a good choice if you want to improve airflow in your case or equip a 240/360 mm radiator with identical fans and synchronized lighting. They are suitable for gaming and streaming configurations where you need stable cooling and visual design without excessive kitsch. If you are chasing a completely silent system with ultra-low dBA values, you might want more specialized "silent" models, but for a balanced build, this is a reasonable set.

The combination of three fans, a wide RPM range, addressable RGB, and a fluid bearing makes them a practical and flexible solution for almost any modern build where cooling and aesthetics are equally important.