TP-Link wifi Access Point Omada AX3000 Adapter - 2.4 / 5 GHz

TP-Link EAP650-Wall is an indoor Wi-Fi 6 access point for wall mounting, aimed at mid-range and more serious installations – hotels, apartments, offices, villas. It combines dual-band connectivity of 2.4 GHz and 5 GHz with a total transfer of up to 2976 Mbps, in very compact dimensions and a flat wall-plate design. It operates on IEEE 802.11ax (Wi-Fi 6) with 2×2 MIMO and support for 160 MHz HE160 channel for higher real throughput. Power is supplied via 802.3af/at PoE, so you only need one Ethernet cable to the access point.

What you get

With this access point, you can cover up to about 40 m² (laboratory value), which is just enough for a room, hotel room, or small office. Speeds of up to 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz allow simultaneous streaming, video conferencing, and browsing for dozens of clients, especially with the help of OFDMA, DL/UL MU-MIMO, and BSS Coloring for less interference. The two gigabit Ethernet ports give you flexibility for connecting to the network or additional devices in the room. Omada SDN integration, Zero-Touch Provisioning, and centralized management save you time when building multi-room or multi-site installations – you configure policies, SSID, and captive portal from one place. The power consumption of up to 11.5 W via PoE is perfectly fine for 24/7 operation without putting too much load on the power supply.

• Dual-band Wi-Fi 6 connectivity with transfer rates of up to 574 Mbps (2.4 GHz) + 2402 Mbps (5 GHz), providing a total capacity of up to 2976 Mbps for busy environments.
• Two internal dual-band antennas with gain 2× 3 dBi (2.4 GHz) and 2× 5 dBi (5 GHz), optimized for in-room Wi-Fi coverage of up to about 40 m².
• 2×2 MIMO for 2.4G and 5G, plus 2×2 DL/UL MU-MIMO and UL/DL OFDMA, which help serve more clients simultaneously with lower latency.
• Support for 160 MHz HE160 channel on 5 GHz for higher throughput with compatible clients and better speeds for local traffic.
• Up to 16 SSID (up to 8 per band) and over 100+ simultaneous clients (depending on the environment), which is convenient for separating networks for guests, staff, and IoT.
• Advanced security options: WPA/WPA2/WPA3 Personal/Enterprise, WPA3-Enterprise for public environments, Captive Portal (SMS/Voucher), VLAN, 802.1X, Rogue AP Detection, Access Control, and MAC filtering.
• Full Omada SDN integration: management via Omada App, hardware/software/cloud-based controller, Zero-Touch Provisioning, SNMP v1/v2c/v3, SSH, and Web (HTTP/HTTPS) for centralized multi-site administration.
• Wall-plate design with dimensions 86 × 86 × 42.6 mm, compatible with standard 86 mm and EU wall boxes, for a clean installation without hanging boxes and cables.
• Power via 802.3af/at PoE with a maximum consumption of up to 11.5 W, simplifying installation to one network cable.
• Reliable operation in the range of 0–40 °C and humidity 10–90% RH (non-condensing), suitable for year-round 24/7 indoor use.

Who it is suitable for

This access point is aimed at in-room Wi-Fi solutions: hotels, hostels, apartments, villas, conference and meeting rooms, where you want a clean wall-mounted installation and control over many points simultaneously. It is also suitable for small offices or co-working spaces that rely on Omada SDN for centralized management and network segmentation. If you are looking for a single powerful point for a huge open space, a ceiling-mount model with wider coverage would be more appropriate.

Combining Wi-Fi 6, 160 MHz channels, serious security control, and Omada SDN management, EAP650-Wall is a very practical solution when you want stable in-room Wi-Fi and easy centralized management without visual noise from equipment on the walls.