DeepCool Fan 120mm - FD12 V2

DeepCool FD12 V2 is a 120mm fan designed for builds where you want stable airflow without unnecessary effects and RGB. The compact size 120 x 120 x 25 mm makes it versatile for cases and radiators, and the black color easily fits into any setup. It operates on standard 12 V power and uses a hydrodynamic bearing for better balance between noise and durability. The connector is 4 PIN, which means you have PWM control through the motherboard for more precise RPM management.

What you get here is a fan that can spin up to 2500 RPM when you need maximum cooling, but can also drop down to around 500 RPM when you want the system to be quieter. Thanks to the Hydro bearing, the fan is more suitable for long-term operation compared to cheap sleeve bearings, especially when mounted vertically in the front panel. The consumption of only 4.8 W at 12 V means it does not overload the power supply, and you can safely use several units in one system. The PWM control through 4 PIN allows you to connect the fan to the motherboard and set profiles according to the CPU or system temperature, instead of running constantly at maximum.

• Size 120 x 120 x 25 mm – standard format that fits in almost any modern case and is suitable for case cooling or mounting on a radiator.
• RPM from about 500 to 2500 RPM – wide range that allows you to choose between quiet mode and aggressive cooling under higher load.
• Voltage 12 V – standard for PC fans, so there are no compatibility issues with modern motherboards and fan hubs.
• Power 4.8 W – low consumption that makes it easy to use several fans without seriously overloading the fan headers.
• Hydro bearing – better lifespan and more stable operation compared to basic sleeve bearings, especially in prolonged 24/7 mode.
• 4 PIN connector – allows PWM control of the fan through BIOS or software, so the RPM follows the temperatures instead of running constantly at one level.
• Black color – neutral appearance that looks good in both clean and more compact gaming builds without the need for RGB.

It is suitable for gaming and work machines where you seek controllable RPM and decent cooling without an emphasis on appearance and lighting. It is also a good choice if you want to add more airflow to an existing build or replace stock fans from the case. If you are chasing only a maximum quiet system at all costs, you should keep in mind that at high RPMs, every 120mm fan is audible.

The combination of PWM control, wide RPM range, and hydro bearing makes DeepCool FD12 V2 a practical choice when you need a reliable 120mm fan without unnecessary extras.