Kolink ARGB 1-4 Splitter Cable - 30 cm

This Kolink ARGB 1-4 splitter cable is a practical solution if you want to connect multiple ARGB devices to a single 3-pin 5V ARGB header on the motherboard or to a controller. It is suitable for a more organized build and less cable chaos when you run out of ARGB connectors. The length of 300 mm provides enough freedom for routing in most cases. The black color blends with the rest of the cable management and does not light up where it shouldn't.

What you get is a splitter that allows you to control up to 4 ARGB devices (for example, illuminated fans) from a single 3 PIN 5V ARGB connector on the motherboard or from a separate controller. It operates on the standard 5 V for addressable RGB, making it compatible with typical ARGB systems on motherboards and controllers based on this standard. Addressable RGB means individual control of the diodes for effects and animations, and the splitter simply expands your options without the need for an additional controller. The length of 300 mm helps you comfortably reach the fans at the front or top of the case without stretching the cable to the limit.

• Supports up to 4 RGB lighting devices, so you can connect multiple ARGB fans or strips to a single source.
• Standard 3 PIN 5V ARGB Header connector for connecting to a motherboard or RGB controller, making it easy to integrate into most modern configurations.
• Addressable RGB (ARGB) lighting for finer effects and synchronization with other components in the system.
• Length 300 mm for more convenient cable management and a cleaner interior of the case.
• Operates on standard 5 V, compatible with typical ARGB lighting systems.
• Compact size according to standard 30 mm, making it easier to hide the splitter behind covers and panels.
• Black coloring for a more unobtrusive profile inside the case and a cleaner look.

This Kolink ARGB 1-4 splitter is suitable if you want to expand the ARGB lighting in your case without changing the motherboard or looking for more complex controllers. It is ideal for gaming configurations with multiple ARGB fans or strips that you want to synchronize. It is not needed if you are using only one ARGB device or if your fans are only with regular RGB (12 V, 4 pin).

The most sensible aspect here is the combination of support for 4 devices, the standard 3 PIN 5V ARGB connector, and 300 mm length, which gives you the flexibility to finish a clean and organized ARGB build without unnecessary complications.