Fan set 3-Pack Cooler Master MasterFan MF120 Lite ARGB

The Cooler Master MasterFan MF120 Lite ARGB fan set is a 3-pack solution for case cooling, aimed at gaming and enthusiast configurations where you want a balance between airflow and aesthetics. You get three 120 mm fans with Addressable RGB lighting and a standard thickness of 25 mm, so they fit in most modern cases and radiators if you use them for push/pull. Each fan operates in a range of 650 - 1750 RPM, with airflow up to 70.5 CFM, which is fully sufficient for a well-ventilated mid- to high-end system. The noise level up to 30 dBA is a reasonable compromise between cooling and silence, especially at lower speeds.

What you get with this set – three black 120 mm fans that you can position as intake and exhaust in the case to ensure stable airflow for the GPU and CPU. With up to 70.5 CFM per fan, you can build a serious air tunnel through the entire case, especially if you combine two at the front and one at the back or top. The range of 650 - 1750 RPM gives you flexibility – keep them quiet at idle, and during gaming or rendering, push the speeds for lower temperatures. The 4 PIN connector allows precise control through the motherboard, while the 3 PIN RGB Header gives you synchronization of Addressable RGB lighting with other components. The Sleeve Bearing is more oriented towards normal desktop use rather than 24/7 server loads, but for a standard gaming PC, it's perfectly fine.

• Three fans in the set – 3 x 120 x 120 x 25 mm – sufficient for full basic cooling of a mid-tower case.
• Wide speed range of 650 - 1750 RPM, allowing quiet operation under light load and more aggressive cooling under load.
• High airflow up to 70.5 CFM per fan for stable component temperatures during gaming and prolonged rendering.
• Noise level up to 30 dBA, which is reasonable for 120 mm fans with such airflow, especially with a proper fan curve.
• 4 PIN fan connector and 3 PIN RGB Header to the motherboard for PWM control and full integration with the ARGB ecosystem.
• Addressable RGB lighting, allowing individual effects and synchronization with other RGB components.
• Sleeve Bearing and weight of 185 g per fan – lightweight, easy to install, and suitable for standard desktop configurations.

It's suitable if you're building a gaming or work machine in a mid-tower case and want to go all-in with a set of three fans with ARGB. It's a good option for a 1080p/1440p gaming build where you want meaningful airflow without dealing with separately searching for each fan. If you're chasing ultra-quiet or 24/7 workstation/server machine, there are more suitable solutions with other bearings and a lower focus on RGB.

The most sensible aspect of this set is the combination of three 120 mm fans with good airflow, PWM control, and Addressable RGB in one package – you get both cooling and an organized, finished look for the case.