DeepCool FC120 White ARGB Fan Pack 3-in-1 3x120mm

DeepCool FC120 White ARGB is a set of three 120 mm case fans aimed at mid-range configurations where you want a combination of good airflow, decent pressure, and a clean white look with ARGB. They operate in a range of 500–1800 RPM, so you can set them up for quiet idle or more aggressive cooling under load. The addressable RGB lighting allows synchronization with other components, and the white color helps if you are aiming for a light or entirely white build. The fans feature hydraulic bearings, which provide a good basis for quieter operation and longer life compared to the cheapest solutions.

What you get: three 120 x 120 x 25 mm fans that cover standard positions for front intake, top, or rear exhaust in most ATX and mATX cases. With an airflow of up to 61.91 CFM and static pressure of 1.83 mmAq, the set is suitable not only for general case cooling but also for denser mesh front panels or finer filters. The maximum noise level of 28 dBA is perfectly fine for a gaming system, especially when using PWM control via the 4-pin connector and letting the motherboard lower the RPM in idle. The low consumption of 1.56 W per fan at 12 V and current 0.13 A does not overload the fan headers and provides peace of mind when installing all three.

• A set of 3 x 120 mm fans, sufficient to cover the main air intake and exhaust positions in a standard case.
• A range of 500–1800 RPM, allowing flexible control – nearly silent operation at low speeds and more serious cooling under high load.
• Airflow of up to 61.91 CFM, suitable for gaming and work configurations with more serious CPUs and GPUs that generate more heat.
• Static pressure of 1.83 mmAq, which helps air pass through filters and denser front/top panels without significant loss of efficiency.
• Maximum noise level of 28 dBA, combined with a 4 Pin PWM connector for precise control of RPM according to temperature.
• Addressable RGB lighting with a 3 pin ADD-RGB 5V VDG (GigaByte) connector for synchronization with the motherboard and other ARGB lighting.
• White color and hydraulic bearings, combining clean visual style with quieter and more reliable operation over time.

Who it is suitable for: if you are building a white or light gaming/streaming build and need three identical ARGB fans for the case, this set hits the mark. It is also suitable for mid-range systems where you want a good balance between noise, airflow, and aesthetics, without chasing extremely low noise or industrial-level pressure. If you are building a super quiet, almost silent build, you will need to play more with the fan curve and lower RPM.

The most sensible aspect here is the combination of three 120 mm fans, PWM control, decent airflow/pressure values, and addressable RGB in a white case – a ready package that covers cooling and aesthetics of the case with one solution.