Gamemax FN12A-N2 WL - Daisy-Chain, A-RGB Fan Pack 3-in-1 3x120mm

Gamemax FN12A-N2 WL is a set of three 120 mm case fans with addressable RGB, aimed at gaming and enthusiast configurations where you want both cooling and a tidy, clean build. Daisy-chain connectivity saves you cable chaos and makes installation significantly easier. The fans combine up to 2000 rpm, airflow up to 58.6 CFM, and a hydraulic bearing for longer life. The black housing and ARGB lighting fit well with almost any theme – from a clean black build to a full RGB show.

What you get: three 120 mm case fans with a balanced profile between airflow and noise. With up to 58.6 CFM and static pressure 1.98 mm H2O, you can use them for both intake and exhaust air, and they will perform better than typical “airflow only” fans with denser front panels. The noise level up to 30.6 dB(A) is reasonable for fans spinning up to 2000 rpm, and PWM control allows you to keep them quieter at idle and ramp them up only under load. The hydraulic bearing reduces friction and vibrations, which is a plus for longevity and a more pleasant acoustic profile. Thanks to the Fan 4 pin PWM connector and 5V ARGB connection, you can integrate them directly into modern motherboards with 5V addressable RGB headers.

• Set of 3 x 120 mm fans, which is enough to fill the entire front or cover intake and exhaust of a more compact case.
• Addressable RGB lighting with 5V ARGB / 3 pin ADD-RGB 5V (V-D-NC-G) connectors for individual control of effects through a compatible controller or motherboard.
• Fan 4 pin PWM connector for precise control of RPM based on temperature – quiet operation under light load and maximum airflow during gaming or rendering.
• RPM range 800 ~ 2000 rpm, providing flexibility between low noise and aggressive cooling when needed.
• Airflow up to 58.6 CFM and static pressure 1.98 mm H2O, suitable for front panels with filters or denser mesh/grids.
• Hydraulic bearing (Hydraulic Bearing) for better durability and smoother operation compared to basic sleeve solutions.
• Operates at 12 V DC with a consumption of about 2.16 W and current 0.18 A per fan, which minimally loads the fan headers on the motherboard.

Who it is suitable for: if you are building a gaming or showcase build and want three identical ARGB fans with easy connectivity and PWM control, this set is a logical choice. It is suitable for mid-range and more powerful configurations that need serious airflow, but you are not chasing absolute minimum noise at all costs. If you are looking for a strictly silent system with very low RPM, you might want to look for slower models, but for a typical gaming scenario, the balance here is good.

The combination of 3 x 120 mm fans, addressable RGB, PWM control, and hydraulic bearings makes this set a practical solution when you want to improve both cooling and the appearance of the case. Gamemax FN12A-N2 WL provides a meaningful balance between functionality, flexibility, and clean installation thanks to the ARGB and daisy-chain idea.