Raijintek AGERAS 12 WHITE ARGB-2 Fan Pack 2-in-1 2x120mm

Raijintek AGERAS 12 WHITE ARGB-2 Fan Pack is a set of 2 x 120 mm case fans aimed at mid-range gaming and enthusiast builds, where you seek a balance between airflow, aesthetics, and noise. You get white fans with Addressable RGB lighting and a 5V ADD-RGB connector for synchronization with the motherboard. At up to 2200 RPM, the fans can move up to 67.38 CFM of air, which is serious for the 120 mm format. The combination of hydraulic bearing and anti-vibration pads keeps noise under control – up to 33 dBA.

What you get

With a range of 800–2200 RPM, you can run them quietly at idle and more aggressively under load, depending on the profiles in your BIOS or motherboard software. The airflow of 67.38 CFM and maximum pressure of 2.57 mmH2O are sufficient for general case ventilation as well as for denser mesh front panels or filters. The hydraulic bearing and declared 40000 hours MTBF mean long operation without annoying rattling noises. The 4-pin connector allows PWM control, while the separate 3 pin ADD-RGB 5V provides individually controllable ARGB lighting with uniform brightness from all directions. With a consumption of only 2.1 W / 0.17 A per fan, you won’t overload the fan headers on the motherboard.

• Size 120 x 120 x 25 mm – standard format that fits most cases and radiator positions.
• Speed 800–2200 RPM – wide range for quiet mode under low load and aggressive cooling when needed.
• Airflow 67.38 CFM – suitable for effective cooling of components and improved circulation in the case.
• Max. pressure 2.57 mmH2O – better performance through filters, radiators, and denser panels.
• Noise level 33 dBA – reasonable level for a performance-oriented fan without becoming annoyingly loud.
• Hydraulic bearing and MTBF 40000 hours – quieter and longer-lasting operation compared to basic sleeve bearings.
• Addressable RGB with 3 pin 5V connector – individually controllable lighting and uniform brightness from all directions.
• Anti-vibration rubber pads – reduce vibrations to the chassis and help achieve lower real noise.
• Set of 2 pieces, white color – ready set for front/top or push–pull configurations in an all-white build.

Who it is suitable for

This set is for you if you are making a white or ARGB build and looking for case fans with good airflow and decent noise profile. It is suitable for gaming systems where you want to optimize GPU and CPU temperatures without investing in expensive high-end fans. If you are aiming for an absolutely silent build at low speeds, you might want to look for lower RPM models, but here you gain flexibility for higher performance when needed.

The most sensible aspect of the Raijintek AGERAS 12 WHITE ARGB-2 is the combination of strong airflow, ARGB flexibility, and white design in a set of two fans. You get practical cooling and a finished look without unnecessary complications.