Adata XPG VALOR MESH Black 650W PSU Case

ADATA XPG VALOR MESH Black 650W PSU is a middle tower case with included power supply, aimed at budget and mid-range gaming and work configurations. It supports standard motherboard formats ATX, Micro ATX, and Mini ITX, so you can comfortably use it for most modern builds. The front mesh panel and four included 120mm fans provide a good foundation for airflow right out of the box. Combined with the built-in 650W PSU, you get a fairly complete solution for starting a new build or upgrade.

What you get

With three 120mm fans at the front and one at the back, the case comes out of the box with a ready push-pull airflow – intake at the front and exhaust at the back, without needing to immediately buy additional fans. The mesh front helps these fans “breathe” freely, which is a plus for warmer GPU and CPU configurations. The limitation for the CPU cooler is up to 166 mm, which covers the most commonly used tower air coolers in the mid-range. The maximum length for the graphics card is 335 mm, giving you comfort for most modern GPUs. The built-in 650W power supply and support for PSUs up to 180 mm from below facilitate cable management and leave space for airflow and drives.

• Case in Middle Tower form factor, suitable for standard gaming and work configurations without taking up unnecessary space.
• Compatibility with motherboards ATX, Micro ATX, and Mini ITX, allowing flexibility in choosing a motherboard and future upgrades.
• Includes a total of 4 x 120mm fans (3 at the front, 1 at the back), so you have basic but meaningful airflow right from the first start.
• Rich options for additional cooling: at the front 3 x 120mm or 2 x 140mm, at the top 2 x 120mm or 2 x 140mm, at the back 1 x 120mm, plus support for radiators up to 360mm at the front and 240mm at the top.
• Maximum length for graphics card 335 mm, which is sufficient for most modern mid-range and high-end models in reasonable sizes.
• Limitation for air CPU cooler up to 166 mm, covering a wide range of tower coolers in the mid-range.
• 2 x 3.5" and 2 x 2.5" storage slots, sufficient for a combination of HDD for capacity and SSD for system and games.
• Side panel made of tempered glass, so you can see the hardware and lighting inside.
• Convenient front I/O with 2 x USB 3.2 Gen 1, combined 3.5mm audio/mic, plus Power and Reset button for easy access.
• Power supply placement at the bottom and support for PSUs up to 180 mm, which helps for better weight distribution and cleaner cable management.
• Built-in power supply with a power of 650 W, suitable for a wide range of configurations without extreme requirements.

Who it is suitable for

This case is a logical choice if you are building a budget or mid-range gaming/work PC and want to have a ready solution with PSU and basic airflow. It supports sufficiently long graphics cards and decent cooling, so it comfortably covers 1080p and 1440p builds in the mid-range. It is not the most suitable option if you are aiming for massive air coolers over 166 mm or super long top-end GPUs.

The combination of mesh design, included fans, tempered glass, and 650W PSU makes ADATA XPG VALOR MESH Black a practical foundation for a modern build without getting overly carried away with extras that you won’t use.