
















COUGAR FV150 RGB Mid-Tower ATX Case Black - CGR-5KA1B-RGB
- Form factor
- Middle Tower
- Panel
- Tempered glass
- Max. cooler size
- 180 mm
- Max. graphics card size
- 400 mm
- RGB
- Yes

Description
The COUGAR FV150 RGB is a middle tower case, aimed at mid-range to high-end gaming and enthusiast builds, where aesthetics and airflow go hand in hand. It supports the standard motherboard formats ATX, mATX and Mini ITX, giving you the freedom to choose a board according to your budget. The side panel made of tempered glass showcases the components and ARGB effects, while the included fans with addressable RGB provide a ready-made base for good cooling and visual style. The graphics card length of up to 400 mm and space for a cooler of up to 180 mm allow you to install serious gaming or workstation hardware without compromises.
What you get: the case comes factory-fitted with a total of 4 ARGB fans – three on the motherboard side (reversed, for a better look and airflow through the glass) and one at the rear, meaning that right out of the box you have a meaningful airflow setup. The huge capacity for additional fans (up to 3 on top, 3 on the bottom, and more on the sides) gives you the ability to tune the airflow so that both a powerful GPU and a more serious CPU operate comfortably under load. Support for radiators up to 360 mm on top and options for water cooling at the rear and on the bottom side make the case suitable for both AIO and custom loop solutions. The internal space with a PSU of up to 210 mm and separate bays for 2.5"/3.5" drives helps with a more organized build and easier cable management.
- Support for motherboards in ATX, mATX and Mini ITX formats, giving you the freedom to assemble both a compact and a more serious gaming configuration.
- Middle Tower form factor, offering a balance between internal space for powerful hardware and relatively reasonable external dimensions.
- Rich fan options: on top up to 3 x 120 mm or 2 x 140 mm, on the bottom side up to 3 x 120 mm or 2 x 140 mm, on the bottom 3 x 120 mm, at the rear 1 x 120 mm – a good base for strong airflow.
- Included are 3 x 120 mm Reversed ARGB fans on the bottom side and 1 x 120 mm ARGB fan at the rear with approximately 1000 RPM, with 5V 3-pin ARGB and 3-pin fan connectors for easy control and synchronization.
- Side panel made of tempered glass, which displays the graphics card, RGB fans, and other components without sacrificing durability.
- Water cooling support: radiators 360/280/240 mm on top, 240/120 mm on the bottom side, 120 mm at the rear, so you can confidently plan an AIO for the CPU or GPU.
- Maximum graphics card length up to 400 mm and maximum CPU cooler height up to 180 mm, suitable for high-end air coolers and long, triple-slot GPUs.
- Storage: 2 x 3.5" and 2 x 2.5" bays allow a combination of large HDDs for capacity and SSDs for speed in the same case.
- I/O panel with USB 3.2 Gen 2 Type-C, 2 x USB-A 3.0, 4-pole headset audio jack and a separate RGB button, so you have a modern front panel and quick access to the lighting.
- 7+3 expansion slots, which is convenient for vertical graphics card mounting or additional cards in more complex configurations.
This case is suitable for gamers and enthusiasts who want a well-ventilated build with visible hardware and RGB, without being limited by the size of the graphics card or cooler. It fits 1080p and 1440p gaming systems, streaming, or heavier productivity, as long as you combine it with the right CPU and GPU. If you are looking for an ultra-compact solution or a completely clean, non-RGB design, this will likely offer you more visual focus.
The strongest aspect of the COUGAR FV150 RGB is the combination of serious airflow potential, a ready ARGB setup, and space for high-end components. This is a case in which you can confidently upgrade for years to come, without worrying that your hardware will "outgrow" it.
Full specifications
- Manufacturer
-
Cougar
- Product code
- CGR-5KA1B-RGB
- Format
-
ATXMini ITXmATX
- Form factor
- Middle Tower
- Supported fans
-
Top: 120mm x 3 / 140mm x 2M/B Side: 120mm x 3 / 140mm x 2Bottom: 120mm x 3Rear: 120mm x 1
- Included fans
-
M/B Side: 120mm Reversed ARGB fan x 3Rear: 120mm ARGB fan x 1Speed: 1000 (±10%) RPMConnector: 5V 3 Pin (ARGB) / 3 Pin (Fan)
- Panel
- Tempered glass
- Expansion slots
-
7+3
- Number of 2.5" / 3.5" slots
-
2 x 3.5''2 x 2.5"
- Number of 5.25" slots
-
No
- I/O ports
-
USB 3.2 Gen 2 Type-C x 1USB-A 3.0 x 24 Pole Headset Audio JackRGB Button
- Max. cooler size
- 180 mm
- Max. graphics card size
- 400 mm
- Power supply unit power
-
Without power supply unit
- Supported power supplies
-
up to 210 mm
- Water cooling support
-
Top: 360mm / 280mm / 240mmM/B Side: 240mm / 120mmRear: 120mm
- Color
-
Black
- Dimensions
- 300 x 400 x 415 mm
- RGB
-
Yes
- Warranty
- 24 months
Reviews
No reviews for this product yet. Be the first!
Reviews with “Verified purchase” are from customers who received a link after completing an order. We provide them with a free shipping code regardless of the rating. We publish all reviews except spam and insults.