DeepCool CC360 ARGB White Mid-Tower mATX Case

DeepCool CC360 ARGB White is a white Mini Tower case for mATX and Mini ITX configurations that balances compact size and serious airflow. It supports graphics cards up to 320 mm and CPU coolers up to 165 mm, so you can comfortably consider a more serious gaming build. The tempered glass provides a clear view of the components, and the included 3 x 120mm fans with ARGB provide a good base for cooling and aesthetics. The entire case is oriented towards a practical mATX solution with enough space for air and cables without taking up half the desk.

What you get

You get a Mini Tower chassis with dimensions 418 x 215 x 431 mm, which accommodates Micro ATX and Mini ITX motherboards but remains easy to fit in smaller spaces. The built-in 3 x 120mm fans save you the cost of basic cooling and immediately provide airflow from the front. Support for water cooling at the front up to 360mm and on top up to 240mm leaves you the option for a serious CPU or GPU loop if you decide to upgrade. With up to 2 x 3.5" and 3 x 2.5" slots, you can combine classic HDDs for capacity and SSDs for speed in one compact case. The I/O panel with USB 3.0, USB 2.0, and Audio in/out provides standard conveniences for headphones, flash drives, and peripherals at the front.

• Form factor Mini Tower with support for Mini ITX and Micro ATX motherboards – a compact case, but flexible enough for most mainstream configurations.
• Included are 3 x 120mm fans, so right out of the box you have ready airflow without buying additional fans.
• Rich fan options: front 3 x 120 / 2 x 140mm, top 2 x 120 / 2 x 140mm, rear 1 x 120mm, and up to 2 x 120mm at the PSU – enough for a serious airflow configuration.
• Support for water cooling at the front 120/140/240/280/360mm, on top 120/140/240mm, and at the back 120mm – a flexible choice for AIO or custom loops.
• Space for a graphics card up to 320 mm and a CPU cooler up to 165 mm, allowing for the installation of larger GPUs and taller tower coolers.
• 2 x 3.5" and 3 x 2.5" drive bays – easily combine large storage with fast SSDs in one case.
• Tempered glass on the side – see components and ARGB lighting without sacrificing the strength and durability of the panel.
• Support for power supplies up to 160mm, located at the bottom – better cable management and separation of the PSU from the main airflow.

Who it is suitable for

This case is a good choice if you want a compact mATX/Mini ITX PC for gaming or work, with good ventilation and the option for serious water cooling later. It is suitable for systems with longer graphics cards and standard-sized PSUs, as long as they fit within the limit of 160mm. If you are aiming for an E-ATX build or huge power supplies and extreme multi-GPU experiments, the form factor and four expansion slots will limit you.

The most sensible aspect here is the combination of a compact Mini Tower format, three included 120mm fans, and serious support for water cooling in a clean white case with tempered glass. You get a good foundation for an organized and cool build without expanding to a full mid-tower.