Case DeepCool CC560 MESH V2 Case ATX

DeepCool CC560 MESH V2 is a middle tower case aimed at budget and mid-range gaming and work configurations, where airflow and practicality are more important than unnecessary embellishments. It supports standard motherboard formats ATX, Micro ATX, and Mini ITX, giving you the freedom for various builds. Right out of the box, you get 4 ARGB fans, so you don't have to think about additional fans and lighting. The tempered glass side panel gives you a direct view of the hardware and RGB inside.

What you get

In the front, you have space for up to 3 x 120 mm or 3 x 140 mm fans, on top for another 2 x 120/140 mm, plus one 120 mm at the back and up to 2 x 120 mm above the PSU shroud, allowing for serious airflow throughout the case. The package includes already installed 3 x 120 mm ARGB in the front and 1 x 120 mm ARGB at the back – you practically have a ready push-pull scheme for air cooling. GPU support up to 370 mm means you can easily install most modern long graphics cards without worrying about them colliding with the front fans. For CPU coolers, you have up to 165 mm in height, which opens options for some serious air towers. Storage is covered with 2 x 3.5" for HDD and 3 x 2.5" for SSD, meaning you can combine large storage space with fast system disks for gaming and work.

• Support for motherboards in ATX, Micro ATX, and Mini ITX formats, giving you flexibility in choosing a platform and budget.
• Middle tower form factor with 7 expansion slots, sufficient for standard GPUs, additional cards, and expansions.
• Included are 3 x 120 mm ARGB fans in the front and 1 x 120 mm ARGB at the back, so you have ready airflow and RGB without additional costs.
• Rich cooling options: in the front up to 3 x 120/140 mm, on top up to 2 x 120/140 mm, at the back 1 x 120 mm and above the PSU shroud 2 x 120 mm for better cooling of the GPU and storage.
• Support for graphics cards up to 370 mm in length, allowing installation of most modern high-end GPUs without worries about space.
• Maximum height for CPU coolers 165 mm, covering a large part of more serious air cooling solutions.
• Disk space with 2 x 3.5" and 3 x 2.5" slots – a good combination for large HDDs for storage plus fast SSDs for system and games.
• I/O panel with 2 x USB 3.0 and HD Audio, which is sufficient for easy access to peripherals and headphones from the front panel.
• The power supply is mounted at the bottom, under the shroud, supporting PSUs up to 170 mm, for a cleaner internal look and better airflow.
• Tempered glass side panel that showcases the configuration and RGB lighting without sacrificing strength.

Who it is suitable for

This case is a good choice for gaming and all-round builds in the mid-range class, where you want good airflow, space for a long graphics card, and a decent amount of storage. It is also suitable for a first build – the included ARGB fans and standard ATX format make assembly easier. If you are aiming for a super compact system or extreme custom loop solutions with large radiators, the form factor may limit you.

The combination of a mesh front panel, four ARGB fans included with the case, support for long GPUs, and tempered glass makes DeepCool CC560 MESH V2 a practical foundation for a clean, well-cooled, and visually appealing build.