













Case DeepCool CG580 4F WH V2 Case ATX, 4 x 120 mm ARGB Fans
- Form factor
- Middle Tower
- Panel
- Tempered glass
- Max. cooler size
- 176 mm
- Max. graphics card size
- 410 mm
- RGB
- Yes
Description
DeepCool CG580 4F WH V2 is a white middle tower case with tempered glass, aimed at mid-range and more serious gaming and enthusiast configurations. You get a spacious case supporting ATX, Micro ATX, and Mini ITX motherboards and very good airflow right out of the box, thanks to the included 4 x 120 mm PWM + ARGB fans. The glass side panel allows you to showcase the hardware and ARGB lighting, while the length for the graphics card up to 410 mm opens space for serious GPUs. At the front, you also have a modern I/O, including USB 3.2 Gen 2 Type-C.
What you get: three 120 mm PWM+ARGB Reverse Blade fans on the side and one 120 mm PWM+ARGB at the back – this means ready out-of-the-box airflow and visually tight build without having to buy additional fans immediately. The support for graphics cards up to 410 mm allows you to install most modern massive GPUs without wondering if it will fit. Maximum cooler height of 176 mm gives freedom for a more serious air CPU cooler, while the PSU tunnel with space for power supplies up to 200 mm helps for cleaner cable management. With 2 x 3.5" and 2 x 2.5" bays, you can combine a large HDD for storage and several SSDs for a fast system and games without wondering where to fit them.
- Compatibility with motherboards ATX, Micro ATX, Mini ITX, giving you freedom in choosing a platform and budget.
- Form factor Middle Tower, balancing between enough internal space and reasonable external dimensions for a desk or under it.
- Included 3 x 120 mm PWM+ARGB Reverse Blade on the side and 1 x 120 mm PWM+ARGB at the back for good airflow and synchronized lighting right out of the box.
- Rich cooling options: on top 3 x 120 mm or 2 x 140 mm, on the side 3 x 120 mm, at the back 1 x 120/140 mm, at the bottom 1 x 120 mm and in the PSU shroud 2 x 120 mm – a total of many scenarios for airflow depending on your build.
- Support for graphics cards up to 410 mm, which is sufficient for most high-end GPUs with massive coolers.
- Maximum cooler height of 176 mm, allowing installation of large tower CPU coolers for quieter and more efficient operation.
- Modern front panel with 1 x USB 3.2 Gen 2 Type-C, 2 x USB 3.0, and HD Audio, so you have fast ports at hand for peripherals, flash drives, and headphones.
- 2 x 3.5" and 2 x 2.5" drive bays – a good base for a combination of massive storage and fast SSDs.
- 7 expansion slots, covering standard ATX configurations with additional cards (sound, capture, network).
- Power supply placement at the bottom and support for up to 200 mm length, for a more stable center of gravity and better separation of hot zones.
Who it is suitable for: if you are planning a gaming or streaming build with a more serious graphics card and want ready ARGB and airflow without much tweaking, this case is a quite logical choice. It is also suitable for people who care about a clean appearance with a white theme and visible hardware through the glass panel. If you are looking for something super compact or an ultra-budget option with minimal fans, this is probably not your form factor.
The combination of space for large GPUs and coolers, included PWM+ARGB fans, and good front I/O makes DeepCool CG580 4F WH V2 a very sensible foundation for a modern, visually organized, and well-cooled build.
Full specifications
- Manufacturer
-
DeepCool
- Format
-
ATXMini ITXMICRO ATX
- Form factor
- Middle Tower
- Included fans
-
Side: 3 x 120 mm (PWM+ARGB Reverse Blade)Rear: 1 x 120 mm (PWM+ARGB)
- Panel
- Tempered glass
- Expansion slots
-
7
- Number of 2.5" / 3.5" slots
-
2 x 3.5''2 x 2.5"
- Number of 5.25" slots
-
No
- I/O ports
-
1 x USB 3.2 Gen 2 Type-CHD Audio x 12 x USB 3.0
- Max. cooler size
- 176 mm
- Max. graphics card size
- 410 mm
- Power supply unit power
-
Without power supply unit
- Supported power supplies
-
Up to 200mm
- Power Supply Unit Location
- Down
- Color
-
White
- Dimensions
- 437 x 235 x 501 mm
- RGB
-
Yes
- Warranty
- 24 months
- Supported fans
-
Top: 3 x 120 mm/2 x 140 mmSide: 3 x 120 mmRear: 1 x 120 mm/1 x 140 mmBottom: 1 x 120 mm(3.5 HDD/120FAN :Choose one of two)PSU Shrouded: 2 x 120 mm
- Water cooling support
-
360 mm - Side240 mm - Side120 mm - Side360 mm - Top280 mm - Top240 mm - Top140 mm - Top120 mm - Top140 mm - Back120 mm - Back
Reviews
No reviews for this product yet. Be the first!