DeepCool CH260 WH mATX Case

The DeepCool CH260 WH is a compact white Mini Tower case, aimed at mATX and Mini ITX builds where you want good air and water flow without taking up half your desk. It supports graphics cards up to 413 mm, which opens up options for more serious GPU configurations in a small form factor. The side panel made of tempered glass allows you to show off your hardware and RGB, if you decide to add some. The case comes without included fans, giving you full control over the air flow and noise level you seek.

What you get: you have space for up to 3 x 120mm or 2 x 140mm fans on top, plus 2 x 120mm at the front and 1 x 120mm at the rear, which allows for a serious push-pull configuration for cooling the CPU and GPU. Support for water cooling up to a 360mm radiator on top and 120mm at the rear is rare for such a compact chassis and is a plus if you plan to use an AIO. With a maximum 174 mm height for the cooler, you can install a bulkier air cooler without it hitting the glass. Support for power supplies up to 150mm with a top-mounted position is convenient if you will use a shorter, high-quality PSU and want to leave more air in the area around the motherboard and graphics card.

• Compact Mini Tower case, suitable for Mini ITX and mATX systems, if you are after a small but functional build.
• Side panel made of tempered glass, which allows good visibility into the interior and highlights a clean build or RGB components.
• Rich fan support: 2 x 120mm at the front, 3 x 120mm or 2 x 140mm on top, 1 x 120mm at the rear for building adequate air flow.
• Water cooling support: 120/240/360mm radiators on top, 120mm at the rear, which is a good base for a quiet and cool system.
• Maximum CPU cooler height 174 mm, sufficient for taller air towers without worry.
• Support for graphics cards up to 413 mm, allowing the use of long, more powerful GPUs in an mATX/Mini ITX configuration.
• Top-mounted power supply with a length up to 150mm, which leaves more space for components and cables in the main chamber.
• Combination of 1 x 3.5" and 1 x 2.5" bays, suitable for a basic configuration with one HDD and one SSD.
• Compact dimensions 438 x 225 x 312.5 mm (L×W×H), convenient for a desk or small space around the monitor.

Who it is suitable for: The CH260 WH is a good choice if you want a clean, white mATX or Mini ITX build with a transparent panel and reasonable options for air and water cooling. It is suitable for gaming and office configurations in a smaller form factor, where you do not need many drives and a huge ATX motherboard. If you are looking for massive storage or space for a bunch of 3.5" drives, this is not the most practical form factor.

The combination of compact dimensions, support for a long graphics card, and a 360mm radiator on top makes the DeepCool CH260 WH a very flexible base for a modern, tight build. You add your own fans and PSU and configure it exactly as you need – from a quiet office PC to a decent gaming rig.