Case DeepCool MATREXX 55 MESH

DeepCool MATREXX 55 MESH is a middle tower case aimed at budget and mid-range gaming and workstation configurations where airflow and hardware space are important. It supports the full range of motherboards – from Mini ITX to Extended ATX, giving you the freedom to upgrade and use larger boards. The tempered glass side panel provides visibility of the build without sacrificing strength. Inside, there is space for graphics cards up to 370 mm and coolers up to 168 mm, which covers most modern GPUs and taller air CPU coolers.

What you get is a chassis with quite flexible internal space and cooling that you can adjust according to your needs. You can install up to three 120mm or three 140mm fans at the front, up to two 120mm or 140mm on top, plus one 120mm at the back, allowing you to build a serious front-to-back airflow for powerful GPUs. The support for water cooling up to 360mm at the front and up to 280mm on top gives you options for more serious AIO solutions. With 2 x 3.5" and 4 x 2.5" slots, you can easily combine large HDDs for storage and SSDs for the system and games. The I/O panel with USB 3.0, two USB 2.0, and HD audio covers everyday needs without constantly searching for the rear ports on the motherboard.

• Case form factor Middle Tower, suitable for balanced gaming and work configurations without taking up too much space.
• Support for motherboards ATX, Micro ATX, Mini ITX, and Extended ATX, giving you freedom in choosing a board and future upgrades.
• Maximum graphics card length 370 mm and maximum cooler height 168 mm, sufficient for most modern GPUs and taller air CPU coolers.
• Fan mounting options: front 3 x 140mm or 3 x 120mm, top 2 x 140mm or 2 x 120mm, back 1 x 120mm, allowing you to set up good airflow according to the components.
• Support for water cooling: front radiators 120/140/240/280/360mm, top 120/140/240/280mm, back 120mm, suitable for AIO and more serious cooling solutions.
• Side panel made of tempered glass, allowing you to showcase the build and lighting without sacrificing strength.
• Total 2 x 3.5" and 4 x 2.5" drive bays, which is enough for combining several HDDs for storage and several SSDs for fast access and gaming.
• I/O panel with 1 x USB 3.0, 2 x USB 2.0, HD Audio Headphones, and HD Audio Mic for easy access to the main ports at the front of the case.
• Supported power supplies up to 170mm, mounted at the bottom, which helps for better cable management and a lower center of gravity.
• Delivered without included fans, so you can choose the exact models based on noise, RPM, and aesthetics.

Who is this case suitable for? For gamers and enthusiasts who want to build an ATX or even E-ATX configuration with good airflow, visible hardware, and flexible cooling options. If you are looking for something super compact or with pre-installed fans and RGB, you will need to budget extra for cooling.

The combination of support for large motherboards and radiators up to 360mm at the front in the DeepCool MATREXX 55 MESH makes it a good foundation for future upgrades without limiting your choice of hardware and cooling.