Endorfy Arx 500 Mesh ARGB Mid-Tower Case - EY2A011

Endorfy Arx 500 Mesh ARGB is a mid-tower case aimed at modern ATX builds with good airflow and visibility of the hardware. It supports ATX, Micro ATX, and Mini ITX motherboards and comes with a total of 5 included fans, so right out of the box you have serious airflow. The tempered glass allows you to showcase the GPU, cooler, and ARGB effects, while the mesh design provides airflow to the system. The dimensions for the cooler and graphics card are generous enough for most modern gaming and workstation configurations.

What you get

With this case, you can actually build a serious build with a powerful GPU up to 350 mm and a tall air or AIO cooler up to 179 mm, without struggling for space. The support for water cooling at the front, top, and back gives you flexibility – for example, a 360 mm radiator at the front for a cooler CPU under load, plus an additional radiator on top if you decide. The five included fans mean you don’t have to buy extras just for basic airflow, and you can directly install the remaining hardware and set up the OS. With up to 6 x 2.5" slots, you have space for several SSDs for games and projects, plus 1 x 3.5" for a large HDD archive. The convenient front panel with USB-C, two USB-A, and separate jacks for headphones and microphone makes daily work and gaming with peripherals much easier.

• Case form factor Middle Tower, suitable for balanced gaming and work configurations without taking up too much space.
• Support for ATX, Micro ATX, and Mini ITX motherboards, giving you freedom in choosing a board according to your budget and needs.
• 5 included fans, with the option at the front for 3 x 120/140 mm, at the top for 2 x 120/140 mm, at the back for 1 x 120/140 mm, and at the bottom for 1 x 120 mm for strong and easily directed airflow.
• Support for water cooling: at the front 120/240/280/360 mm, at the top 120/240/280 mm, at the back 120/140 mm, so you can comfortably plan for more serious AIO solutions.
• Maximum graphics card size 350 mm and maximum cooler height 179 mm, sufficient for most modern high-end GPUs and taller tower coolers.
• A total of 7 expansion slots, which is standard for full ATX and allows for multi-slot GPUs plus additional cards if needed.
• Storage options with 1 x 3.5" and 6 x 2.5" slots, to combine fast SSDs for gaming and work with a larger HDD for archiving.
• Tempered glass side panel, through which components, RGB, and cable management are clearly visible.
• Power supply with bottom placement, supported up to 300 mm, for a lower center of gravity and better separation of the PSU from the main airflow.
• Functional I/O panel with USB-C x 1, USB-A x 2, separate 3.5 mm jacks for headphones and microphone, plus power and reset buttons for convenient access.

For whom it is suitable

This case is suitable if you are aiming for a well-ventilated mid-range or high-end gaming/production build with an ATX motherboard, serious GPU, and water cooling option. It is also suitable for systems with many SSDs – streaming, editing, heavier work. If you are looking for an ultra-compact or do not want a transparent panel and ARGB look, you will probably lean towards a simpler form factor.

The combination of generous airflow, 5 included fans, water cooling up to 360 mm, and real space for powerful hardware makes the Endorfy Arx 500 Mesh ARGB a very practical base for a modern, well-cooled build.