HYTE Y40 Tempered Glass, Mid-Tower, Black Case

HYTE Y40 is a Mid-Tower case with tempered glass, aimed at mid-range to high-end configurations, where aesthetics are as important as airflow. It supports the three most popular motherboard formats – ATX, Micro ATX, and Mini ITX, giving you freedom in choosing your platform. With a maximum graphics card length of up to 422 mm and space for a cooler up to 183 mm, you can comfortably think about a serious GPU and a solid air CPU cooler. The black color and glass panel make the case a good base for a clean and organized build focused on the components.

What you get: well-thought-out interior space with a separate area for the power supply at the bottom and generous capacity for air and water cooling. You have several fan positions – at the top, sides, bottom, and back – so you can easily build a meaningful airflow tunnel depending on where your GPU is and what radiator you will install. The two built-in fans give you a start without having to immediately buy a full set. The included PCI Express Riser 4.0 x16 in the package allows you to mount the graphics card vertically, which is a plus for both aesthetics and airflow distribution around it. With the combined 2.5" and 3.5" slots, you can organize the system with one larger HDD plus several SSDs without cluttering the interior.

• Case form factor Middle Tower supporting ATX, Micro ATX, and Mini ITX motherboards, making it a flexible choice for almost any type of configuration.
• Tempered glass panel on the side, showcasing the components and RGB lighting, without sacrificing strength compared to regular glass.
• Maximum graphics card length up to 422 mm, sufficient for most massive modern GPU models.
• Support for CPU coolers up to 183 mm in height, allowing installation of high-end air coolers.
• Rich fan options: at the top 3 x 120 mm, on the sides 2 x 120/140 mm, at the bottom 1 x 120/140 mm, and at the back 1 x 120 mm, with 2 included fans already in the package.
• Support for water cooling: on the sides 120/140/240/280 mm, at the top 120/240/360 mm, and at the back 120 mm, providing freedom for AIO or custom loop configurations.
• Modern I/O panel with 2 x USB 3.2 Gen2, 1 x USB Type-C, and a combined Audio/Mic jack, plus included in the package PCI Express Riser 4.0 x16 for vertical mounting of the graphics card.
• The power supply is mounted at the bottom, supporting PSUs up to 224 mm, and the case comes without an included power supply, so you can choose a model according to your system's needs.
• Storage: 1 x 3.5" for a larger HDD and 2 x 2.5" slots for SSDs, sufficient for a typical gaming or work configuration.

This case is suitable if you are building a gaming or work setup focused on design, good cooling, and the possibility of a powerful GPU. It is particularly sensible if you want vertical mounting of the graphics card and plan AIO water cooling with a longer radiator. If you are looking for a cheap, fully functional case without an emphasis on the appearance through glass, you will likely pay for features that you will not use.

The combination of tempered glass, serious support for fans and radiators, plus the included PCIe 4.0 riser makes the HYTE Y40 a black chassis with which you can easily build a clean, modern, and powerful build without struggling with space limitations.