Case Noctua Antec Flux Pro Noctua Edition Case E-ATX

This is the Noctua Antec Flux Pro Noctua Edition Case E-ATX – a middle tower chassis aimed at serious configurations with a focus on cooling and silence. It supports motherboards from Mini ITX to Extended ATX, so you can comfortably plan for larger platforms. The combination of tempered glass and large internal volume allows for both good airflow and a visually clean build. The space for components is impressive – up to 455 mm graphics card and up to 190 mm CPU cooler.

What you get

This case comes straight “loaded” with cooling – factory-installed are 3 x NF-A14x25 G2 PWM in the front, 1 x NF-A14x25 G2 PWM in the back, and 2 x NF-A12x25 G2 PWM on the PSU shroud. This means strong, directed airflow throughout the system, without immediately thinking about additional fans. Support for up to 3 x 140 mm fans in the front and top, as well as options for fans at the bottom and on the PSU cover gives you the flexibility to adjust the airflow according to the specific GPU and CPU. With 4 x 3.5" and 2 x 2.5" slots, you can combine large capacity HDDs for storage with faster SSDs for the system and games. The front I/O with USB 3.1 Type-C and 2 x USB 3.0 makes the connection to modern peripherals and fast external drives direct and convenient.

• Compact yet spacious Middle Tower form factor, suitable for powerful gaming and workstation configurations.
• Support for motherboards ATX, Mini ITX, Micro ATX, and Extended ATX for maximum freedom in platform choice.
• Factory-installed 6 Noctua fans (4 x NF-A14x25 G2 PWM and 2 x NF-A12x25 G2 PWM) for serious cooling right out of the box.
• Rich airflow options with supported fans: up to 3 x 140 mm in the front and top, 1 x 140 mm in the back, 2 x 140 mm at the bottom, and 3 x 120 mm on the PSU cover.
• Generous internal space with a maximum graphics card length of 455 mm and a maximum CPU cooler height of 190 mm, suitable for massive GPUs and air coolers.
• Storage flexibility with 4 x 3.5" and 2 x 2.5" slots, allowing a combination of many TB HDDs and fast SSDs.
• Modern front panel with 1 x USB 3.1 Type-C, 2 x USB 3.0, and HD Audio for convenient access to fast ports and headphones.
• Side panel made of tempered glass that showcases the components and lighting without sacrificing strength.
• 8 expansion slots for multi-GPU, power cards for more displays, or additional expansion cards.

Who it is suitable for

The case is very suitable if you are aiming for a serious airflow build – a powerful gaming PC, workstation, or long-term high-load setup where temperature is critical. There is room for large GPUs and massive air coolers, making it a good base for a high-end configuration. If you are looking for a super compact or ultra-budget case, this chassis is probably beyond your needs.

The most impressive aspect is the combination of factory-installed Noctua fans, large internal volume, and support for E-ATX – a ready platform for a serious, well-cooled build without unnecessary compromises.