






Case Thermaltake View 270 Plus TG ARGB Snow - CA-1Y7-00M6WN-01
- Form factor
- Middle Tower
- Panel
- Tempered glass
- Max. cooler size
- 180 mm
- Max. graphics card size
- 420 mm
- RGB
- Yes
Description
Thermaltake View 270 Plus TG ARGB Snow is a middle tower case in white color, aimed at mid-range and high-end gaming and enthusiast builds. It supports standard motherboard formats such as ATX, Micro ATX, and Mini ITX, giving you the freedom to choose your board and configuration. The side panel made of tempered glass showcases all the hardware and ARGB effects. It comes with 3 ARGB Lite fans, so right out of the box you have basic airflow and lighting.
What you get is a case with quite flexible cooling support and space for serious hardware. Support for graphics cards up to 420 mm means you can comfortably think about longer and bulkier GPU models without headaches. Maximum CPU cooler height of 180 mm allows you to install a tall air cooler if you don't prefer liquid cooling. If you want AIO, you can install up to a 360 mm radiator on top, and 120 mm at the back, which covers most mainstream liquid cooling solutions. The two 3.5" and two 2.5" slots are sufficient for a standard setup with one or two hard drives plus SSDs for the system and games.
- Middle tower form factor case with support for ATX, Micro ATX, and Mini ITX motherboards, covering the most popular gaming and workstation configurations.
- Side panel made of tempered glass, allowing you to showcase RGB components and a clean internal build.
- Supported graphics cards up to 420 mm, which is enough for long and bulky high-end GPUs.
- Maximum CPU cooler height of 180 mm, providing a choice between more serious air towers and liquid cooling.
- Rich fan support: up to 3 x 120 mm or 2 x 140 mm on top, up to 2 x 120 mm on the right, up to 1 x 120/140 mm at the back, and up to 3 x 120 mm on the power supply shroud for fine-tuning airflow.
- Pre-installed 3 x 120 mm ARGB Lite fans (2 in front/right as intake and 1 at the back as exhaust) with about 1000 rpm and noise around 22.3 dBA for balanced airflow and low noise out-of-the-box.
- Support for liquid cooling with a radiator up to 360 mm on top and 120 mm at the back, giving you options for AIO for a cooler and quieter build.
- Storage space with 2 x 3.5" and 2 x 2.5" slots, sufficient for a combination of large HDDs for storage and fast SSDs for the system and games.
- Power supply located at the bottom, supporting PSUs up to 220 mm, which is fine for most quality, longer power supplies.
The case is suitable if you want a modern white build with visible ARGB elements and plan to use mid to high-end hardware, including larger graphics cards and serious cooling. It is a good choice for gaming configurations, streaming, and heavier workloads where airflow and space inside matter. It is not aimed at super-compact or ultra-budget systems, but rather at a balanced, good-looking mid-tower project.
The strongest aspect of this model is the combination of spacious interior volume, glass panel, and pre-installed ARGB fans, plus serious flexibility for air and liquid cooling. If you are looking for a white case that can accommodate almost anything you decide to put inside, the View 270 Plus TG ARGB Snow is a solid foundation for such a build.
Full specifications
- Manufacturer
-
ThermalTake
- Product code
- CA-1Y7-00M6WN-01
- Format
-
ATXMini ITXmATX
- Form factor
- Middle Tower
- Supported fans
-
Top: 3 x 120mm, 2 x 120mm, 1 x 120mm, 2 x 140mm, 1 x 140mmRight: 2 x 120mm, 1 x 120mmRear: 1 x 120mm, 1 x 140mmPower Cover: 3 x 120mm, 2 x 120mm, 1 x 120mm
- Included fans
-
Pre-installed fans: Right(intake): 2 x 120 x 120 x 25 mm ARGB Lite fan (1000rpm, 22.3 dBA)Rear(exhaust): 1 x 120 x 120 x 25 mm ARGB Lite fan (1000rpm, 22.3 dBA)
- Panel
- Tempered glass
- Expansion slots
-
7
- Number of 2.5" / 3.5" slots
-
2 x 3.5''2 x 2.5"
- Number of 5.25" slots
-
No
- I/O ports
- 1 USB 3.2 (Gen 2) Type-C, 2 USB 3.0, HD Audio
- Max. cooler size
- 180 mm
- Max. graphics card size
- 420 mm
- Power supply unit power
-
Without power supply unit
- Supported power supplies
-
Up to 220 mm
- Power Supply Unit Location
- Down
- Water cooling support
-
Top: 1 x 360mm, 1 x 240mm, 1 x 120mmRear: 1 x 120mm
- Color
-
White
- Dimensions
- 230 x 454 x 456 mm
- RGB
-
Yes
- Warranty
- 24 months
Reviews
No reviews for this product yet. Be the first!