Case Xigmatek Gaming X Case ATX 4 RGB Fans - EN46621

This Xigmatek Gaming X (EN46621) case is a middle tower chassis for ATX, Micro ATX, and Mini ITX configurations, aimed at gaming and more serious home builds. It comes with 4 included RGB fans and a side panel made of tempered glass, so you have decent airflow while showcasing your hardware. It supports graphics cards up to 320 mm and CPU coolers up to 160 mm, opening the door for quite a few gaming combinations. The middle tower format and 7 expansion slots allow for a standard ATX system without worrying about space for cards and expansions.

What you get

The practical aspect here is that you don't start from scratch – you already have 4 RGB fans installed, so right from the start, the case is ready for decent airflow at the front and back. You can add more fans at the front and top – up to 3 x 120/140 mm at the front and 2 x 120 mm at the top, plus one at the back, which provides good flexibility for a cooler build. The two 2.5" and two 3.5" slots cover the typical combination of SSD for the system + 1–2 larger HDDs for games and archiving. The I/O panel with USB 3.0, 2 x USB 2.0, and HD Audio is sufficient for everyday peripherals and headphones. The tempered glass side makes cable management and neat installation not just useful, but also visible – if you are a fan of a clean, illuminated build, this has a direct effect.

• A case in Middle Tower form factor, suitable for standard gaming and home ATX configurations.
• Supported motherboard formats: ATX, Micro ATX, and Mini ITX, giving you freedom in motherboard selection.
• Includes 4 RGB fans, so from the first start, you have ready airflow and aesthetics.
• Maximum graphics card length up to 320 mm, allowing installation of most modern gaming GPUs.
• Maximum CPU cooler height 160 mm, sufficient for many of the more serious air coolers.
• A total of 7 expansion slots, which is standard for ATX and provides space for additional cards (sound, capture, network).
• Storage: 2 x 3.5" and 2 x 2.5" slots, sufficient for a combination of SSD for the system and several larger drives.
• Side panel made of tempered glass, showcasing the RGB fans and organized interior.
• I/O panel with 1 x USB 3.0, 2 x USB 2.0, and HD Audio for easy access to flash drives, peripherals, and headphones.
• Supported power supplies up to 165 mm, covering most standard PSU models.

Who it is suitable for

This case is suitable for gaming and all-round configurations, where you want an ATX motherboard, a standard graphics card, and decent airflow without entering enthusiast dimensions. It is also suitable for a first build – you have fans and visibility through the glass, which makes both assembly and checks easier. It is not the best choice if you are aiming for massive air coolers over 160 mm or very long, three times thicker GPUs outside typical sizes.

The combination of four RGB fans, tempered glass, and support for ATX in a middle tower format makes Xigmatek Gaming X a balanced choice for a gaming build that looks good and breathes normally without unnecessary complications.