Computer Case Thermaltake View 380 XL TG ARGB Snow - CA-11E-00M6WN-00

Thermaltake View 380 XL TG ARGB Snow is a middle tower case aimed at more serious gaming and enthusiast configurations, where space, airflow, and aesthetics have equal weight. It supports the most commonly used motherboard formats – ATX, Micro ATX, and Mini ITX, so you have the freedom for different builds. The tempered glass side panel showcases the hardware, and the included 4 fans save you part of the initial investment in cooling. The space for a graphics card up to 420 mm makes it suitable for longer, more powerful GPUs.

What you get
A practical chassis with a focus on airflow and modern front I/O. You have options for up to 3 fans at the bottom, 3 on the side, 3 on top, and 1 at the back, allowing for an aggressive push-pull configuration and good fresh air intake even with powerful GPUs and a hotter CPU. The cooler limit up to 160 mm guides you towards a more sensible choice between lower, wider tower coolers or AIO solutions if you want maximum thermal headroom. The drive slots – 1 x 3.5" and 2 x 2.5" – cover a standard scenario: one large HDD for storage plus one or two SSDs for system and games. Power supplies up to 180 mm give enough choice for serious PSUs without sacrificing cable management.

• Support for ATX, Micro ATX, and Mini ITX motherboards, allowing you to use both compact and full-size boards according to budget and needs.
• Middle Tower form factor, providing a balance between internal volume, cooling, and space occupied next to the desk.
• Rich fan options – 1 x 120 mm at the back, 3 x 120 mm on the side, 3 x 120 mm at the bottom, 3 x 120 mm or 2 x 140 mm on top, so you can build a serious air tunnel for powerful hardware.
• 4 included fans, allowing you to start the build with adequate cooling without immediately buying additional fans.
• Tempered glass side panel to clearly see your RGB components and cable management.
• 8 expansion slots, allowing for thicker GPUs, additional cards, and more flexible configurations.
• Maximum graphics card length of 420 mm, opening the door for long high-end GPUs without space headaches.
• Support for PSUs up to 180 mm, sufficient for powerful power supplies, leaving room for tidy cables.
• Combination of 1 x 3.5" and 2 x 2.5" slots, covering a typical combination of HDD for mass storage and SSD for quick access.
• Front I/O with 2 x USB 3.0, 1 x USB Type-C, and 1 x HD Audio, so you have quick access to modern ports directly on the case.

Who it's suitable for
The case is a suitable choice if you're planning a mid-range to more serious gaming or creator build with a long graphics card and want a visible, tidy configuration behind glass. If you want a huge number of 3.5" drives for a NAS-type system or a super high air cooler over 160 mm, there are more suitable chassis.

The most sensible thing here is the combination of good internal volume, rich airflow layout, and modern I/O, without sacrificing the clean look of a white case with tempered glass.