FSP Group MP7 Dual Tower Cooler - POO0000015

FSP Group MP7 Dual Tower Cooler is an air CPU cooler with a dual radiator (dual tower) and two 120 mm fans, aimed at mid-range and more serious gaming and workstation configurations. It supports current sockets AM4, AM5, LGA 1200, LGA 1700, and LGA 1851, so you can comfortably use it for future upgrades as well. The two 120 mm fans with 4 PIN control and 5V ARGB lighting combine good airflow with a stable visual effect. The color combination black and silver makes it easy to fit into most cases and themes.

What you get

The two included 120 x 120 x 25 mm fans provide a total airflow of up to 76 CFM, which is more than enough for a serious CPU under load, especially in a well-ventilated case. The speed of up to 1800 RPM gives you a balance between cooling and noise, with up to 32 dBA keeping the cooler relatively discreet for the dual tower class. The hydraulic bearing is key for longer life and smoother operation compared to cheap sleeve bearings, especially during prolonged gaming or rendering. Addressable RGB (5V ARGB) allows you to synchronize the lighting with other components through your motherboard, without relying on additional controllers if you already have ARGB headers.

• Air cooling with a dual tower design, suitable for higher loads without the complexity of liquid cooling.
• Compatibility with AM4, AM5, LGA 1200, LGA 1700, and LGA 1851 sockets, making it a universal choice for current and future platforms.
• Two 120 x 120 x 25 mm fans, which cover the radiator towers well and improve heat dissipation.
• Speed up to 1800 RPM for serious airflow when the CPU is under full load.
• Airflow 76 CFM, sufficient to maintain stable temperatures during gaming, streaming, and heavy multi-tasking.
• Noise level 32 dBA, keeping your system relatively quiet for a dual tower with two fans.
• 5V Addressable RGB and 4 PIN connector, to combine PWM control of the speeds with full ARGB synchronization of the lighting.
• Hydraulic bearing, providing better reliability and lower noise compared to basic solutions.

Who it is suitable for

This cooler is a good choice if you are building a gaming or workstation machine on AM4/AM5 or LGA 1700/1851 and want something more serious than the standard box cooler, without switching to AIO. It is suitable for upgrading an existing build where you want better temperatures and synchronized ARGB visuals. If you are aiming for a maximum quiet fanless setup or extreme overclocking with minimal degrees, you may need an even lower RPM solution or a larger class of cooling.

The combination of dual tower design, two 120 mm fans with 76 CFM and ARGB, plus wide socket compatibility makes the FSP Group MP7 Dual Tower Cooler a practical and flexible choice for modern gaming and productivity builds.