CPU cooler DeepCool AG400 White ARGB V2

DeepCool AG400 White ARGB V2 is an air cooler for CPU, aimed at mid-range and even more serious gaming and work configurations. It relies on a single 120 mm fan and cooling capacity of up to 220 W, which is more than enough for modern processors with high boost. The white design with 5V ARGB support allows you to visually integrate it into a light or RGB build. You get a combination of decent airflow, controllable noise, and wide compatibility with Intel and AMD sockets.

What you get

With a fan size of 120 x 120 x 25 mm and a speed range of 500–2100 RPM, you can balance between low noise in idle and aggressive cooling under load. The airflow of 75.89 CFM (128.94 m³/h) and maximum pressure of 2.53 mmAq help the air to effectively pass through the fins of the radiator, which is important for hotter CPUs. The noise level of up to 31.6 dBA is reasonable for a cooler of this class – it is audible but not an annoying “turbine,” especially if you set an appropriate fan curve in the BIOS. The 4-pin connector allows PWM speed control, while 5V ARGB provides synchronization with the motherboard for lighting to your taste.

• Air cooling with a capacity of up to 220 W, which covers even hotter multi-core CPUs under gaming and productivity load.
• Wide compatibility with CPU sockets: AM4, AM5, LGA 1700, LGA 1851, LGA 1200, LGA 115x, so you can use it for future platform upgrades as well.
• One 120 x 120 x 25 mm fan offers standard compatibility with cases and a good combination of airflow and noise.
• Speed range of 500–2100 RPM provides flexibility – quiet mode for everyday use and higher speeds when the CPU is under serious load.
• Maximum airflow of 75.89 CFM / 128.94 m³/h helps maintain stable temperatures during long gaming sessions or renders.
• Max. pressure of 2.53 mmAq helps the air to effectively pass through the dense radiator instead of “bouncing” off it.
• Noise level of up to 31.6 dBA and 4-pin PWM connector allow you to set a profile that is quiet in idle and adequate under load.
• 5V ARGB connector allows for synchronized lighting with other RGB components in the system.

Who it is suitable for

AG400 White ARGB V2 is a good choice for gaming and all-round builds on AM4/AM5 or LGA 1700/1851, where you want stable temperatures without entering the price range of high-end AIO. It is suitable for users who value the white design and ARGB but still seek practicality and price/cooling ratio. If you plan heavy overclocking on a top CPU and want the lowest temperatures and noise, you might want to look at a more serious air or water cooler.

The combination of 220 W cooling capacity, wide socket support, and 120 mm ARGB fan makes DeepCool AG400 White ARGB V2 a very reasonable core for a modern, balanced gaming build.