CPU Cooler DeepCool AG500 BK CPU Cooler ARGB V2

DeepCool AG500 BK ARGB V2 is an air CPU cooler aimed at mid-range and more serious gaming and work configurations. You get a single 120 mm fan with 4-pin PWM and 5V ARGB for synchronization with the rest of the lighting in the case. The combination of high airflow and relatively low noise level makes it a good choice if you want a quieter and more stable build compared to basic stock coolers. The rich socket support, including AM5 and LGA 1700 / 1851, gives you peace of mind for future upgrades.

What you get

The base is a 120 x 120 x 25 mm fan that provides airflow up to 67.88 CFM (115.33 m³/h), sufficient to blow warm air out of the radiator and keep the CPU in check under typical gaming load. The noise level of up to 29.4 dBA is in the comfortable zone – you will hear the system only under more serious load, without drowning out the rest in the room. The maximum static pressure of 2.04 mmAq means that the air passes effectively through the tightly packed fins of the radiator. The 4-pin connector allows PWM control from the motherboard, so you can set profiles from quiet mode to more aggressive cooling depending on the situation. Thanks to the 5V ARGB connector, you integrate the lighting with the motherboard or controller and visually arrange your entire system without additional adapters.

• Air cooling with 120 x 120 x 25 mm fan, which combines a relatively compact size with sufficient capacity for gaming and work.
• Wide compatibility with sockets: AM4, AM5, LGA 115x, LGA 1200, LGA 1700, LGA 1851, so you can use it on different platforms and for future upgrades.
• Airflow up to 67.88 CFM / 115.33 m³/h, which allows effective heat dissipation even in more closed cases.
• Maximum static pressure of 2.04 mmAq, helping the air to pass through the radiator fins and lower the temperature faster.
• Noise level of up to 29.4 dBA, suitable for everyday gaming and work without annoying constant fan noise.
• 4-pin PWM connector for the fan, which gives you automatic control of the speeds according to the CPU temperature.
• 5V ARGB lighting, which synchronizes with the other components and allows you to build a complete visual style.

Who it is suitable for

AG500 BK ARGB V2 is suitable if you are building a mid-range gaming or work machine and want better cooling and aesthetics than the stock cooler, without entering the territory of heavy dual-fan towers or water AIO solutions. A good choice for AM4/AM5 or LGA 1700/1851 processors under normal to higher but not extreme loads. If you are chasing maximum overclocking and absolute minimum temperatures, you will likely be looking at larger towers or water cooling.

The most sensible here is the combination of decent airflow, reasonable noise level, and wide socket compatibility, plus ARGB for a complete build. With it, you get a balanced CPU cooler that does the job and looks good without unnecessary complexity.