CPU cooler Thermalright Peerless Assassin 120 Vision MAX ARGB, Dual-Tower, 5 inch Display, CPU Cooler

Thermalright Peerless Assassin 120 Vision MAX ARGB is a dual-tower air cooler for CPU, aimed at mid-range to high-end gaming and enthusiast configurations. The combination of two 120 mm fans and serious airflow provides stable cooling even under higher load. The added ARGB and 5-inch display (depending on the model in the title) make the cooler not only effective but also a visual centerpiece of your case. Support for a wide range of sockets, including AM4/AM5 and LGA 1700/1851, makes it a flexible choice for modern platforms.

What you get

The two 120 x 120 x 25 mm fans operate in a range of 500 to 2150 RPM, which means that under low load they can remain quiet, while blowing a serious amount of air through the radiator when needed. The total airflow of up to 138 CFM helps quickly dissipate heat from the CPU, especially useful during prolonged gaming or rendering. The maximum static pressure of 2.87 mmH2O is important for dense radiator fins, as the air actually passes through effectively rather than "bouncing" off the front. All of this while the cooler remains at up to 27 dBA, which is a reasonable level for a system you want to be powerful but not annoyingly noisy. The ARGB lighting and connections via 4 PIN, 5V ARGB, and 9-pin USB 2.0 give you control over the look and features through software and the motherboard.

• Air cooling of the Dual-Tower type with two 120 mm fans, suitable for serious heat dissipation without the complexity of liquid cooling.
• Broad compatibility with CPU sockets: AM4, AM5, LGA 1200, LGA 1151, LGA 1150, LGA 1155, LGA 1156, LGA 1700, LGA 1851, allowing you to use it when upgrading to new platforms.
• Two fans sized 120 x 120 x 25 mm provide a balance between high performance and standard compatibility with most cases.
• A wide RPM range of 500–2150 RPM offers flexibility – a quiet mode for light loads and maximum airflow for heavy tasks.
• Maximum airflow of up to 138 CFM / 234.46 m³/h, which is a serious volume of air for maintaining low temperatures during gaming and rendering.
• Static pressure of up to 2.87 mmH2O, helping air pass through the radiator effectively, even with denser fins.
• Noise level of up to 27 dBA, which is perfectly tolerable for a powerful configuration and does not dominate the room's sound.
• Connectors 4 PIN, 5V ARGB, and 9-pin USB 2.0 for easy control of speed, lighting, and display via the motherboard and software.

Who it is suitable for

This cooler is suitable if you are building a powerful gaming or creative build on AM4/AM5 or LGA 1700/1851 and want solid air cooling instead of an AIO. If you are looking for a super-compact system in a small case, the dual-tower design may be a challenge for space, so you should check compatibility with the case. For anyone who wants a combination of cooling, silence, and visual extras with a display, this is a very logical choice.

The most impressive aspect is the combination of high airflow, reasonable noise, and rich control via ARGB and USB, plus broad socket compatibility. You get a cooler that is both practical and visually completes your entire build.