Memory KLEVV RAM CRAS V RGB Obsidian Black 32GB (2x16GB) DDR5 6400MHz UDIMM CL30 EXPO/XMP - KD5AGUA80-64B300G

KLEVV CRAS V RGB Obsidian Black is a DDR5 memory kit for desktop, aimed at the higher mid-range and enthusiast gaming/workstation configurations. You get a total capacity of 32GB in the form of 2 x 16GB modules, which is ideal for dual channel configurations. The operating frequency is DDR5-6400 (6400 MT/s) with tight latency CL30, so it responds quickly under load in games and applications. Add RGB lighting plus the black aluminum heatsink and you get a combination of performance and a clean look.

What you get with this kit – first, the high frequency of 6400 MT/s and timings 30-38-38-78 give you excellent bandwidth and low latency for modern CPUs. Dual Channel Kit configuration with two modules loads the memory controller more evenly and helps for better overall system response. Intel XMP 3.0 and AMD EXPO profiles make overclocking to the set 6400 MT/s literally a matter of a few clicks in BIOS, instead of manually setting timings and voltage. On-die ECC (ODECC) works in background mode for more reliable operation of the chips themselves, without you needing special ECC-compatible hardware. And the RGB lighting with side effect and the low-profile aluminum radiator with height 44 mm are a convenient combination for cases with a window and denser CPU coolers.

• 32GB (2 x 16GB) DDR5 capacity, sufficient for modern games, streaming, and heavy multitasking.
• DDR5-6400 (6400 MT/s) operating frequency with fully tested timings 30-38-38-78 for fast data access.
• Low latency CL30 for DDR5 class, which helps with CPU-dependent titles and latency-sensitive applications.
• Intel XMP 3.0 and AMD EXPO profiles for easy activation of the set frequency from BIOS without manual settings.
• On-die ECC (ODECC), non-ECC module – error correction inside the chip for more stable operation, without need for special ECC motherboards.
• Aluminum heatsink with tone-on-tone black design and side RGB effect for good cooling and clean look.
• DDR5 UDIMM (288-pin) for motherboards with DDR5 slots, optimized compatibility with Intel 14th Gen Core and AMD Ryzen 9000 series and QVL testing.
• SPD speed 4800 MT/s at 1.1 V for initial boot and overclock voltage 1.4 V when XMP/EXPO profile is activated.

This kit is suitable if you are building a modern gaming or productive desktop with DDR5 platform and want a combination of high refresh rate gaming, fast rendering, and running many applications simultaneously. A good choice is also for more compact systems, where 44 mm height facilitates compatibility with most air coolers. It is not aimed at extreme overclock records, but rather towards stable, real-world usable settings at high frequency.

The most sensible thing here is the balance – 32GB DDR5-6400 CL30, dual channel, XMP/EXPO profiles and pleasant RGB design, without unnecessary complications. You put it in the correct DDR5 motherboard, activate the profile and get a fast, stable and visually finished system.