Stabilizer POWERWALKER AVR 1000, 1000VA

POWERWALKER AVR 1000 is a network stabilizer with a capacity of 1000VA / 600W, aimed at home and office configurations where you have voltage-sensitive equipment – PC, monitor, router, audio equipment. It is not a UPS with a battery, but a device that stabilizes the power supply and protects your equipment from fluctuations and spikes. It operates with an input voltage range of 180 - 264 VAC and outputs stabilized 230 VAC±8%. The compact case in black color and a weight of 1.7 kg make it easy to integrate under a desk or in a tech cabinet.

What you get

With this stabilizer, you get active AVR (Automatic Voltage Regulation) ±8%, which compensates for drops and spikes in the network voltage and maintains a more stable power supply for connected devices. The input voltage range 220/230/240VAC; 180 - 264 VAC means that even with more serious fluctuations in the network, your equipment continues to operate without resetting or suffering from undervoltage/overvoltage. With 3 x Schuko outputs, you can connect a full workstation – PC, monitor, and network equipment – and all pass through the same protection. The built-in protections against short circuit, overheating, and overload reduce the risk of damage in case of installation problems, defective devices, or excessive load. The input frequency of 50Hz is standard for our electrical network, so integration is completely painless.

• The capacity of 1000VA / 600W is sufficient for a typical gaming or office configuration plus peripherals, without the stabilizer operating at its limits.
• The wide input range of 180 - 264 VAC allows stable operation even in installations with frequent drops or increases in voltage.
• The output voltage of 230 VAC±8% is maintained within tighter limits, which is important for sensitive PSUs, audio, and network equipment.
• The AVR ±8% function reduces the risk of restarting computers and electronics during short-term drops and spikes in the network.
• 3 x Schuko outputs provide flexibility – you can protect a computer, monitor, and additional device through one stabilizer.
• The built-in protection against short circuit, overheating, and overload protects both the connected equipment and the stabilizer itself.
• With a weight of 1.7 kg and a case in black color, the device is compact and unobtrusive next to or under the desk.

Who it is suitable for

POWERWALKER AVR 1000 is suitable if you have unstable network voltage and want to protect a gaming or office computer without investing in a full UPS with a battery. It is also a good choice for small offices with 1–2 important workstations that should not reset with every voltage drop. If your goal is to work during a complete power outage (blackout), you will need a UPS, not just a stabilizer.

The combination of 1000VA / 600W power, AVR stabilization, and multiple levels of protection makes this stabilizer a practical solution for protecting your everyday equipment. You get stable power supply and basic security without unnecessary complexity in the installation.