Arctic Thermal pad TP-3 100x100mm, 0.5mm - ACTPD00052A

Arctic Thermal pad TP-3 with a size of 100 x 100 mm and a thickness of 0.5 mm is a universal thermal pad for cooling chips, VRM zones, memory, and other components where thermal paste is not convenient. The large area allows you to cut it to the exact size you need instead of buying many different pieces. The blue color is a bonus if you care about a tidy appearance inside the case. It is suitable for both PCs and consoles, routers, and other devices.

What you get

With a thickness of 0.5 mm, the thermal pad is a good choice when there is a slight height difference between the chip and the heatsink and you want even contact across the entire surface. The area of 100 x 100 mm means that from one piece you can cut several smaller ones for RAM, VRM, or chips in a laptop/consoles without worrying that you will run out of material. The thermal resistance of -40° ~ 150° provides peace of mind that the pad operates stably at both low and high temperatures typical for loaded systems. The density of 3.4 g/cm3 and hardness of 55 Shore OO help achieve a good balance between softness (to fill in unevenness) and stability (to not flow or tear easily during installation).

• Thermal pad type Arctic Thermal pad TP-3, suitable for contact between chips and heatsinks where thermal paste is not practical.
• Large size 100 x 100 mm, allowing you to cut exactly as much as you need for several components from one piece.
• Thickness 0.5 mm, suitable for cases with slight gaps between surfaces, ensuring even pressure and good thermal conductivity.
• Thermal resistance / maximum temperature -40° ~ 150°, making it reliable for long-term use in most desktop and mobile systems.
• Density 3.4 g/cm3, providing stable contact and filling of micron unevenness between the chip and the heatsink.
• Hardness 55 Shore OO, balancing softness for easy installation and sufficient resistance to not tear under pressure.
• Blue color for easy visual checking of where the thermal pad is placed during assembly or servicing.

Who it is suitable for

This thermal pad is suitable if you are servicing or modifying graphics cards, laptops, consoles, VRM zones on motherboards, or other devices where there is a heatsink with a gap to the chips. It is also suitable if you want a universal solution “one piece – many cuts” for service or for several different projects. If you need greater thickness for very large gaps, it would be better to look for a thicker thermal pad.

The combination of the large format 100 x 100 mm, thickness 0.5 mm, and wide temperature range -40° ~ 150° makes this Arctic TP-3 a practical solution for stable and clean cooling in various situations.