Thermal paste Thermal Grizzly Conductonaut Liquid Metal 1g

Thermal Grizzly Conductonaut Liquid Metal 1g is a liquid metal for serious temperature reduction compared to standard thermal pastes. It is positioned more as a high-end solution for enthusiasts, overclocking, and situations where you want maximum heat transfer between the chip and cooler. The formula has a very high thermal conductivity of 73 W/mk and comes in a small but sufficient amount of 1g for several applications if applied correctly. There are no marketing tricks here – this is a tool with which you chase down degrees, but it also requires more careful handling.

What you get

With a thermal conductivity of 73 W/mk, Conductonaut can lower temperatures compared to mass-market pastes, providing more thermal headroom for boost frequencies and overclocking, or simply quieter operation of the cooling system. The low dynamic resistance is supported by a very low viscosity of 0.0021 Pas, which means that the liquid metal easily fills the microscopic irregularities between the IHS/die and cooler for maximum contact. The density of 6.24 g/cm³ indicates a concentrated, “dense” composition, not a diluted mixture. The limit temperature range of 10 °C to +140 °C is sufficient for typical CPU and GPU surfaces under air or water cooling, as long as it is not applied in extreme scenarios with very high local temperatures. With 1 gram, you have enough material for several thin layers on small chips, as long as you don’t overdo it with the amount.

• Liquid metal type thermal paste – aimed at maximum heat transfer compared to standard silicone or ceramic solutions.
• Very high thermal conductivity 73 W/mk, which helps for lower temperatures and better stability under load.
• Very low viscosity 0.0021 Pas, allowing for even spreading and excellent filling of micro-roughness between surfaces.
• Density 6.24 g/cm³, suggesting a concentrated formula without unnecessary fillers.
• Operating temperature range 10 °C / +140 °C, suitable for typical PC loads with good cooling.
• Compact amount of 1g – enough for several applications with a thin and precise layer.
• Product code TG-C-001-R from Thermal Grizzly, easy to recognize and refer to when ordering or replacing.

Who it is suitable for

Conductonaut Liquid Metal 1g is a sensible choice if you are chasing lower temperatures on a serious gaming or high-performance build, doing overclocking, or want to squeeze the maximum out of compact cooling. It is more suitable for people who have experience with installation and know how to work carefully with liquid metal, rather than for a first build or completely novice user. If you just want a “apply and forget” solution, classic thermal paste may be more convenient for you.

The combination of very high thermal conductivity, low viscosity, and concentrated formula makes this liquid metal a strong tool when you want to drop a few more degrees where ordinary pastes have already done their job.