LAN cable extender Cudy POE10 Up to 100m.

The Cudy POE10 LAN cable extender is a small but extremely useful device if you want to overcome the limitation of standard 100 meters for Ethernet. It is positioned as a practical addition to any PoE network – for cameras, access points, or remote devices. It operates passively in an environment of 0 to 50°C, which is fine for most indoor installations and some protected outdoor locations. With 2 x RJ-45 ports and support for PoE, it allows you to transfer both data and power over the same LAN cable to additional distances, up to a total of about 100 m.

What you get

The idea of the Cudy POE10 is simple: you plug the LAN/PoE cable from a switch or injector into one RJ-45 port and extend a segment to the device (camera, access point, other PoE device) from the other port. This way, you can position network devices further away without having to provide separate power to them. The support for PoE is key – both power and network run over one cable, simplifying cabling and saving outlets, adapters, and splitters. The operating temperature range of 0 to 50°C provides peace of mind that under normal office/home and light industrial conditions, the device will perform its job reliably.

• Manufacturer Cudy, which means a focus on networking equipment and accessories for PoE solutions.
• Built-in PoE, so you can simultaneously transfer power and data to remote devices over a standard LAN cable.
• 2 x RJ-45 ports for easy inline connection between switch/injector and the end network device.
• Operating temperature from 0 to 50°C, suitable for most indoor installations and protected environments.
• Suitable for extending a LAN segment up to about 100 m, when the standard cable length is not enough.
• 24 months warranty, which is a normal period for networking equipment of this class and provides peace of mind for longer installations.

Who it is suitable for

The Cudy POE10 is suitable if you are building or expanding a network with PoE devices – IP cameras, access points, PoE phones, or sensors that are located further from the switch. It is useful for both small offices and shops, as well as for home video surveillance systems. It is not particularly necessary if your installation is compact and all devices are within short cables and without PoE.

The most valuable aspect here is the combination of PoE support, simplicity (only two RJ-45 ports), and sufficient temperature range, which makes the Cudy POE10 a practical solution when you just need “a little more cable,” but without compromising on power and stability.