EATON 5E 2200 USB IEC G2 2200VA 1200W UPS

UPS EATON 5E 2200 USB IEC G2 2200VA 1200W is a line-interactive UPS aimed at more serious configurations – entire workstations, small servers, network equipment, or several less demanding machines. With a capacity of 2200VA and real power of 1200W, you get a stable buffer during power outages and drops in the grid. It operates with input voltage 110–300 VAC, which helps to 'smooth out' typical variations in the power grid before they reach your equipment. The output features a simulated sine wave, which is perfectly fine for most PC power supplies, routers, switches, and peripherals.

What you get is a UPS that can handle several machines at once without breaking a sweat. Thanks to 6x IEC C13 outputs, you can connect not only a computer but also a monitor, router, NAS, or other critical devices, so you don't lose connection and work during power issues. Charging for 4–6 hours to 90% means that after a serious outage, the battery is relatively quickly ready again. Through the USB connection and included software, you can monitor the status of the UPS and set up automatic shutdown of the system during prolonged power outages. The noise level below 40dB makes it suitable for office/home environments without annoying constant buzzing.

• Line-interactive type – better protection from typical fluctuations in the grid compared to the most basic offline UPS models.
• Capacity 2200VA / 1200W – enough power for a more serious system plus peripherals, or several lighter devices at once.
• 6x IEC C13 outputs – allows you to organize the power supply of several key devices from one UPS, without the need for power strips after it.
• Input voltage 110–300 VAC – wide range that helps to compensate for drops and spikes before they affect your equipment.
• Output voltage 220/230/240 VAC – stable power supply for standard computer and network devices in various electrical standards.
• Software and USB slot – ability to monitor the status of the UPS and automatically safely shut down systems.
• Built-in protections – against overvoltage, short circuit, and overheating, plus an alarm and sound signaling for quick response to problems.
• Charging time 4–6 hours to 90% – the UPS relatively quickly restores its capacity after a longer power surge.
• Noise < 40dB – suitable for placement next to a desk in an office or at home, without attracting unnecessary attention.

Who it is suitable for: if you want your computer, router, NAS, or small server not to 'drop' during every power issue, this UPS is a good base. It is especially meaningful for home offices, small businesses, studios, and small network cabinets. If you are looking for a perfect sine wave specifically for more sensitive equipment, you may need a higher class (online) UPS, but for standard IT equipment, this solution is practical.

The combination of 2200VA/1200W, 6 IEC outputs, software via USB, and a full set of protections makes EATON 5E 2200 USB IEC G2 a stable choice when you want control and peace of mind during power dramas. There are no unnecessary extras, just what you need for reliable protection of your systems.