UPS POWERWALKER VFI 1000 CG PF1 1000VA

POWERWALKER VFI 1000 CG PF1 is an online UPS from the more serious class, aimed at protecting sensitive equipment – servers, network equipment, workstations. With a capacity of 1000VA and an output voltage waveform of pure sine wave, you get stable and 'clean' power even in poor network conditions. The LCD control panel provides clear real-time status information, and the built-in surge protection guards against spikes and power surges. It also supports ViewPower software for monitoring and control from a computer.

What you get

The online type means that the UPS continuously supplies power through the inverter, thus isolating your equipment from fluctuations in the network, not just during a complete outage. At full load, you have about 4.44 minutes of operation, and at 50% load – 12.9 minutes, which is more than enough for controlled shutdown of servers, project saving, or normal work completion. With 4x IEC C13 outputs, you can connect several key devices – for example, a server, switch, router, and one important workstation. The three internal batteries 12V/7Ah provide a stable buffer, and the ability to add additional batteries opens the door for longer autonomous operation if you decide to expand it later.

• Online UPS from POWERWALKER, model VFI 1000 CG PF1, suitable for protecting sensitive and critical equipment.
• Capacity of 1000VA, sufficient for a more serious server or several lighter devices plus network infrastructure.
• Output voltage waveform of pure sine wave, which is important for devices with more demanding or active power supplies.
• Battery block with 3 x 12V/7Ah batteries and the possibility for additional batteries if longer autonomy is needed.
• Runtime of up to 12.9 minutes at 50% load and about 4.44 minutes at full load, providing time for normal shutdown and data protection.
• 4x IEC C13 outputs and C14 input connector for standard, organized, and secure connectivity in a rack or office environment.
• LCD control panel and ViewPower software for convenient monitoring, management, and automatic shutdown of systems.
• Wide input voltage range of 160-300VAC (or 110-300VAC at low load), with correction of fluctuations before they reach your equipment.
• Low distortion of nominal voltage – up to ≤2% at linear and ≤4% at nonlinear load, plus built-in surge protection.
• Operation at input frequencies 40Hz - 70Hz and stabilized output frequency with a deviation of only ±0.1Hz, ensuring more stable power supply.

Who it is suitable for

It is suitable for small and medium offices, home servers, laboratory systems, network and telecommunications equipment, where you want constant protection, not just a 'backup power'. If you are looking for a UPS for large data centers or very heavy industrial loads, this model may be too small in capacity and maintenance time.

The combination of online topology, pure sine wave, expandable battery block, and clear LCD control makes this POWERWALKER VFI 1000 CG PF1 a very sensible choice if you want stable protection for your important equipment without unnecessary effects.