UPS POWERWALKER VFI 1000C LCD 1000VA On-Line

POWERWALKER VFI 1000C LCD is an On-Line UPS with a capacity of 1000VA, aimed at protecting more serious workstations, small servers, or important office machines. The On-Line type means continuous double conversion and stable power supply, with no interruption when switching to battery. You get a pure sine wave output and 3x IEC C13 outputs for direct connection of equipment with standard IEC power cables. The LCD control panel gives you quick access to key information about load, battery, and network status.

What you get

This UPS has a capacity of 1000VA and a runtime of about 4 minutes at full load and up to 12.5 minutes at 50% load, which is more than enough for controlled work preservation, system shutdown, and avoiding data corruption. Inside, there are 2 batteries 12V/9Ah, and the pure sine wave is important for sensitive equipment such as active PFC power supplies, audio equipment, and some network devices. The input range from 110-160VAC (Low Line Transfer) to 300VAC (High Line Transfer) gives you serious tolerance in case of poor network quality before switching to battery. Through the ViewPower software and connection via USB or RS-232, you can monitor the status and automate shutdown of machines during longer outages.

• The On-Line UPS type provides continuous double conversion, stable voltage, and zero transfer time during power outages.
• The capacity of 1000VA is suitable for a powerful system or a small cluster of devices that need to remain stable during disturbances.
• The output is with pure sine wave, which reduces the risk of problems with sensitive power supplies and equipment.
• At full load, you have about 4 minutes of operation, and at 50% load – about 12.5 minutes, enough for saving projects and controlled shutdown.
• The built-in 2 x 12V/9Ah batteries provide a good balance between weight 9.8 kg and autonomy for this class of UPS.
• The input range from 110-160VAC ±5% to 300VAC ±5% allows operation in networks with large fluctuations without constant battery switching.
• USB, RS-232, and Intelligent Slot are available, giving you flexibility for monitoring, management, and integration into a larger infrastructure.
• The distortion of the nominal voltage is up to ≤3% at linear load and ≤6% at nonlinear load, indicating a clean and stable output.
• Overvoltage protection and 3x IEC C13 outputs allow you to protect several key devices with one UPS.

Who it is suitable for

It is suitable if you want reliable protection for important PC systems, a small server, network equipment, or a workstation where even a brief power drop is a problem. It is a good choice for a small office, studio, or home server, where you care about stable voltage, not just “holding” during power outages. If you need long autonomy with external battery modules, this model is not suitable because there is no option to add additional batteries.

The combination of On-Line topology, pure sine wave, meaningful autonomy for the 1000VA class, and rich connectivity options make the POWERWALKER VFI 1000C LCD a stable foundation for protecting important equipment. The control and monitoring you get for this capacity and format are particularly impressive.