UPS POWERWALKER VFI 2000 ICR IoT PF1 2000VA

POWERWALKER VFI 2000 ICR IoT PF1 2000VA is an On-Line UPS, aimed at more serious systems – servers, network equipment, sensitive devices, and more demanding desktop configurations. The On-Line topology means continuous double conversion and stable power supply, without switching "holes". The capacity of 2000VA and output with pure sine wave make it suitable for devices that cannot compromise on voltage quality. The LCD panel gives you a quick glance at status, load, and battery, without digging through menus in the dark.

What you get
With this UPS, you have 8x IEC C13 outputs, allowing you to connect several servers, storage, router, switch, and more peripherals, without juggling with power strips. The built-in 6 batteries 12V/7Ah provide backup, and the option for additional batteries allows you to increase autonomy if your infrastructure requires it. The input voltage 160-300VAC (or 110-300VAC at low load) helps the UPS handle unstable networks without immediately switching to battery. The Winpower software allows you to monitor and control, including scheduled shutdown of machines during longer outages, and charging to 90% in about 3 hours means quick recovery of readiness after an interruption.

• On-Line type with double conversion, suitable for sensitive and critical equipment that requires constant stable power supply.
• Capacity 2000VA, sufficient for several servers, network equipment, or heavier workstations plus peripherals.
• Pure sine wave output, which is important for power supplies with active PFC and devices sensitive to voltage waveform.
• 8x IEC C13 output connectors and C20 input, so you can organize clean and standardized cable management in a cabinet or rack.
• Input voltage in a wide range 160-300VAC / 110-300VAC at low load, which reduces battery wear in areas with unstable networks.
• Built-in control LCD panel for monitoring load, voltage, battery status, and alarms directly from the front panel.
• 6 x 12V/7Ah batteries with the option to add additional batteries if you need longer autonomy.
• A rich set of connection slots – Dry contact, RS-232, WLAN Port, Management Card Slot, RJ-45 – for integration with network monitoring and remote management.
• Charging time about 3 hours to 90%, suitable for environments with frequent but short power interruptions.
• Form factor 2U and weight around 23 kg, convenient for mounting in rack environments and easier on-site planning.
• Built-in surge protection for additional security of connected equipment.

Who it is suitable for
This UPS is suitable for small and medium business server environments, telecommunications and network equipment, as well as for home or office rack solutions where continuous operation is mandatory. If you are looking for just a cheap UPS for a single office PC and monitor, this is more than your needs, but for several critical machines in one cabinet, it is in its element.

The combination of On-Line design, 2000VA capacity, pure sine wave, and rich connectivity options makes POWERWALKER VFI 2000 ICR IoT PF1 a stable foundation for infrastructure that should not stop at the first drop in voltage.