UPS POWERWALKER VI 1000 STL

POWERWALKER VI 1000 STL is a line-interactive UPS aimed at home and small office configurations where you want basic but reasonably sized protection. With a capacity of 1000VA and simulated sine wave, it is suitable for typical PC systems, routers, NAS, and peripherals. You have 2 x CEE 7/3 (Type F) outputs, allowing you to connect the main machine and another key device. The LCD control panel provides clear information about status, load, and battery without relying solely on audible signals.

What you get is a UPS that provides about 5.5 minutes of operation at 50% load – enough time to save a project, stop games normally, and safely shut down the system. Inside, there is one 12V/9Ah battery, which charges to 90% in about 8 hours, so it is ready again for the next outages overnight. The input range of 162-290VAC helps smooth out lighter fluctuations in the network without constantly switching to battery, which preserves the battery itself. Through the USB connection and the PowerMaster software, you can monitor parameters and set automatic shutdown of the system at critical battery levels. Weighing 4.9 kg, it is stable enough but also easy to move when needed.

• Line-interactive UPS with a capacity of 1000VA, suitable for protecting desktop PCs, small servers, routers, and NAS in home or office environments.
• Two CEE 7/3 (Type F) outputs allow you to protect both the main machine and another key device like a monitor or network equipment simultaneously.
• Operating time of about 5.5 minutes at 50% load gives you a window for normal saving and shutdown, instead of risking data loss.
• Built-in 12V/9Ah battery (1 piece) with charging time 8 hours to 90%, balanced between autonomy and quick recovery after a power outage.
• Wide input range 162-290 VAC and support for 50Hz or 60Hz reduce switching to battery during lighter drops and peaks.
• Output frequency ±1Hz in battery mode and simulated sine wave provide stable power for standard power supplies and electronics.
• LCD control panel and USB connection with PowerMaster software give you a clear view of load, voltage, and battery status.
• Compact design weighing 4.9 kg and standard Schuko input connector facilitate its integration into any home and office configurations.

Who it is suitable for: if you want reasonable protection for a gaming PC, workstation, or small office without entering the price territory of online UPSs, this model is a logical choice. It is suitable for frequent but short outages and fluctuations in the network. It is not suitable if you are looking for a pure sine wave for more sensitive equipment or long autonomy with external batteries, as there is no option to add additional batteries.

The combination of 1000VA capacity, LCD panel, software control, and reasonable operating time makes it a practical choice for real, everyday scenarios where stability and control are more important than unnecessary extras.