


UPS POWERWALKER VI 1200 SH 1200VA Line Interactive
- TYPE
- Linear-interactive
- Capacity
- 1200 VA
- Capacity
- 1200 W
- Control panel
- without LCD
- Output voltage shape
- Simulated sine wave
Description
POWERWALKER VI 1200 SH is a line-interactive UPS with a capacity of 1200VA, aimed at home and small office configurations that want basic but reliable protection. You get a device with simulated sine wave, suitable for standard IT equipment – PC, monitor, router, switches, and peripherals. The combination of 2x Schuko and 2x IEC C13 outputs gives you flexibility in connecting various devices. No LCD panel, but with basic control and monitoring via USB and the Winpower software.
What you get
With a capacity of 1200VA and two internal batteries 12V/7Ah, the UPS provides a runtime of about 1.3 minutes at full load and up to 11 minutes at 50% load. This is more than enough to save your projects, close operating systems, and shut down equipment in a controlled manner during a power outage. The line-interactive design stabilizes the input voltage in the range of 170-280 VAC ±7%, which helps against drops and spikes in the network. Through the USB connection and the Winpower software, you can monitor the status of the UPS and set up automatic shutdown of the PC during prolonged power outages.
- Line-interactive type with a capacity of 1200VA, suitable for protecting desktop computers, network equipment, and peripherals during frequent interruptions and fluctuations in the network.
- 2x Schuko and 2x IEC C13 outputs allow you to connect both standard power supplies with Schuko plugs and devices with IEC cables, without searching for additional power strips.
- Two 12V/7Ah batteries provide up to 11 minutes of operation at around 50% load – enough for controlled shutdown and data preservation.
- Input voltage 170-280 VAC ±7% and surge protection keep your equipment safe from unstable networks and short spikes.
- Simulated sine wave output is suitable for most standard PC power supplies and office equipment, without unnecessary cost increase.
- USB slot and Winpower software allow monitoring and automatic shutdown of the system during long power outages.
- Charging time of about 6 hours to 90% provides relatively quick recovery of readiness after a longer interruption.
Who it is suitable for
This UPS is a good choice for home and small office configurations – a desktop computer with a monitor, NAS, router, or small server, where the priority is safe shutdown and basic surge protection. It is not the best option if you need long hours of autonomy or the ability to add additional batteries – there is no such option here.
The combination of 1200VA capacity, several types of outputs, and reasonable runtime at partial load makes it a practical UPS that you can easily integrate into a sensible home/office setup and forget about sudden power interruptions.
Full specifications
- Manufacturer
-
POWERWALKER
- Warranty
- 24 months
- TYPE
- Linear-interactive
- Capacity
- 1200 W; 1200 VA
- Output connectors
-
2x schuko outputs, 2x IEC C13 outputs
- Battery model
-
12V/7Ah
- Software
- Winpower
- Control panel
- without LCD
- Runtime
- Full load - 1.3 min; 50% load - 11 min
- Output voltage shape
- Simulated sine wave
- Input voltage
-
170-280 VAC ±7%
- Input connectors
- C14
- Surge protection
-
Yes
- Number of batteries
- 2
- Input frequency
- 50Hz or 60Hz
- Output frequency
- ±1Hz (battery mode)
- Additional batteries
- No ability to add batteries
- Connection slots
-
USB
- Charging time
- 6h to 90%
- Noise
- < 40dB
- Output voltage
-
220/230/240 VAC
- Alarm
-
Yes
- Sound signaling
- Yes
- Weight (kg)
- 8,6
- Dimensions
- 364 x 139 x 195 mm
Reviews
No reviews for this product yet. Be the first!