UPS POWERWALKER VI 1200 SHL LCD, 1200VA, Line Interactive

POWERWALKER VI 1200 SHL LCD is a line-interactive UPS with a capacity of 1200VA, aimed at small office and home systems that need reliable protection during power outages and fluctuations. You get a device with an LCD control panel for clear real-time information and enough outputs for several devices simultaneously. It operates with a simulated sine wave, which is perfectly sufficient for standard PC configurations, routers, NAS, and peripherals. Moreover, it does so quietly, with noise levels below 40dB, making it suitable for use near your desk.

What you get

With a capacity of 1200VA and two batteries 12V/7Ah, this UPS provides you with time to save your work and safely shut down your systems – about 1.3 minutes at full load and up to 11 minutes at 50% load. The input range of 170-280 VAC ±7% and line-interactive topology help smooth out dips and spikes in the grid before they reach your equipment. The output voltage is stabilized at 230 VAC, and the waveform is a simulated sine wave – optimal for most computer power supplies and network equipment. Through the USB port and the Winpower software, you can monitor the status of the UPS and configure automatic shutdown of the PC during power failure, which effectively saves you from lost files and corrupted data.

• Capacity of 1200VA, suitable for protecting a standard PC, monitor, router, and additional small devices.
• Two 12V/7Ah batteries provide about 1.3 minutes at full and up to 11 minutes at 50% load, sufficient for controlled shutdown and brief operation during a power outage.
• Line-interactive design with an input voltage of 170-280 VAC ±7% helps to compensate for fluctuations in the grid without constant switching to battery.
• Output voltage of 230 VAC with a simulated sine wave, optimized for PC power supplies, network, and office equipment.
• 2x Schuko and 2x IEC C13 outputs allow you to connect several different types of devices simultaneously without the need for additional adapters.
• USB connectivity and Winpower software provide monitoring and automatic shutdown control directly from your computer.
• Charging time of 6 hours to 90% and noise level below 40dB make it convenient for daily use in an office or near your home desk.

Who it is suitable for

This UPS is a good choice for a home or small office computer, productivity workstation, small server, NAS, router, and network equipment. It is suitable if you want security during short outages and stabilization during poor network quality, without entering the more expensive class with pure sine wave. If you plan to protect heavier equipment with high consumption for a long time on battery or need additional external batteries, this is not the most accurate solution.

The combination of 1200VA capacity, clear LCD panel, practical outputs (2x Schuko + 2x C13), and software control via USB makes POWERWALKER VI 1200 SHL LCD a very reasonable choice for stable protection of your everyday equipment.