UPS POWERWALKER VI 2000 LCD

POWERWALKER VI 2000 LCD is a linear-interactive UPS with a capacity of 2000VA, aimed at small servers, gaming/office machines, and sensitive equipment at home or in a small office. The combination of the LCD control panel and ViewPower software gives you a clear view of the load and battery status. You receive protection from overvoltages and stabilization of the input voltage in the range 162–290VAC, so that drops and spikes in the network do not bother you. If needed, you rely on the built-in batteries for a short, but controlled time to preserve work and safe shutdown.

What you get

With a capacity of 2000VA and 2x 12V/9Ah batteries, this UPS is aimed at protecting a more serious configuration – a powerful gaming/work PC, plus additional peripherals, a small server, or network equipment. At 50% load you have about 5 minutes of runtime, which is fully sufficient for saving data, finishing tasks, and controlled shutdown; at full load the time is about 0.7 minutes, which is rather for "enduring" short drops or immediate shutdown in case of a longer power outage. The output voltage waveform is a simulated sine wave, which is fine for most PC and office equipment power supplies. Through USB and the ViewPower software you can monitor parameters and set automatic system shutdown at a critical battery level. The charging time is about 4 hours to 90%, so it returns to readiness relatively quickly after a more serious discharge.

• Linear-interactive type with a capacity of 2000VA, suitable for protecting more powerful PC configurations, small servers, and network equipment.
• Combination of 2x IEC C13 and 2x IEC C14 outlets, so you can directly plug in standard power cords and devices with IEC connectors without additional adapters.
• Built-in 2 batteries 12V/9Ah, which provide about 5 minutes runtime at 50% load and 0.7 minutes at full load – enough for saving and controlled shutdown.
• Wide input range 162–290VAC and overvoltage protection, which helps against unstable power supply and network spikes.
• Output voltage waveform simulated sine wave and output frequency ±1Hz (battery mode), suitable for mass-market PC and office power supplies.
• LCD control panel for quick review of load, battery status, and operating mode directly from the device.
• Connectivity via USB and ViewPower software, allowing monitoring and automatic shutdown management from the computer.
• Charging time 4 hours to 90%, so the UPS restores capacity relatively quickly after interruption.
• Weight of about 12.1 kg, which is typical for this class and indicates the presence of a serious battery pack, although there is no option for additional batteries.

Who is it suitable for

This UPS is a good choice if you want to protect a gaming or work station, a small server, NAS, or network equipment in an office/home environment and you need time to save work and shut down normally. It is suitable for frequent short interruptions and fluctuations in the network, but it is not a solution for long hours of autonomous operation, nor for scenarios requiring expandable batteries.

The most sensible thing in this model is the combination of 2000VA capacity, LCD panel, USB control, and a clear set of connectors, which makes it a practical tool for protecting important equipment, without unnecessary extras and complications.