UPS POWERWALKER VI 2200 SH 2200VA Line Interactive

POWERWALKER VI 2200 SH is a line-interactive UPS with a capacity of 2200VA, aimed at home and small office configurations where you need stable power for several important devices. It offers a combination of 2x Schuko and 2x IEC C13 outputs, so you can connect both standard plugs and equipment with IEC cables. It operates with simulated sine wave, which is fine for most PC configurations, network, and peripheral equipment. Management and monitoring are done through the Winpower software, and the control panel is clean – without LCD, just with basic indications.

What you get is a UPS that gives you time to save your work and shut down the machines in a controlled manner, instead of relying on luck during power surges and outages. At 50% load you have about 5 minutes of battery operation – more than enough for a normal shut down of a powerful PC, router, and another device. At full load the time drops to about 0.5 minutes, which is more of an “emergency buffer” – to prevent systems from shutting down instantly. The two 12V/9Ah batteries charge to 90% in about 6 hours, so after a long power outage, you are relatively quickly “ready” again. The input range of 170-280 VAC ±7% and surge protection help you keep your equipment safe during fluctuations in the network, while the USB connection provides an option for automatic shutdown of the computer when running on battery.

• Line-interactive type with a capacity of 2200VA, suitable for protecting several key devices simultaneously.
• 2x Schuko and 2x IEC C13 outputs, giving you flexibility for PCs, monitors, small servers, and network equipment.
• Battery operation at 50% load up to 5 minutes and about 0.5 minutes at full load, providing time for controlled shutdown.
• Two internal batteries 12V/9Ah, with no option to add additional batteries, with a charging time of about 6 hours to 90%.
• Input range 170-280 VAC ±7% and surge protection to handle typical fluctuations and spikes in the network.
• Winpower software and USB slot for connection, allowing monitoring and automatic shutdown of the connected computer.
• Output voltage shape simulated sine wave, compatible with most PC and office devices, plus output frequency ±1Hz in battery mode at input 50/60Hz.

Who it is suitable for: if you want basic but serious protection for a gaming or work computer, small server, NAS, router, and a few more peripherals, this UPS does the job. It is more suitable for short interruptions and stabilization than for long autonomous operation, and it is not for scenarios where you need to extend battery capacity with external modules.

The combination of 2200VA capacity, convenient 2 Schuko + 2 IEC C13 outputs, and clear parameters for runtime and charging makes it a practical choice if you are looking for a balance between protection and price, without unnecessary extras.