UPS Powerwalker VI 2200 SH 6x IEC 2200VA Line Interactive

UPS Powerwalker VI 2200 SH is a line-interactive UPS with a capacity of 2200VA, aimed at protecting several systems or a more power-hungry single device (PC, workstation, small server). You get 6 outputs with IEC C13 connectors and a simulated sine wave output, which is fine for most standard PC PSUs and office equipment. The input range of 170-280 VAC helps to “eat” fluctuations in the network without constantly switching to battery. There is no LCD, but you have basic control and monitoring via USB and the Winpower software.

What you get

With a capacity of 2200VA, this UPS is adequate for several desktop PCs + monitors, or one more serious computer with peripherals. At 50% load, you get about 5 minutes of runtime – enough to save a project, finish a recording, or shut down the machines in a controlled manner. At full load, the time drops to about 0.5 minutes, which is more for “saving from sudden shutdown” than for prolonged battery operation. The two internal batteries 12V/9Ah are fixed, with no option for additional external batteries, so you know exactly what autonomous resource you can rely on. With Winpower, you can monitor the status via USB and set up automatic shutdown in case of power loss.

• Line-interactive type with a capacity of 2200VA, suitable for protecting several workstations or one more demanding configuration.
• 6x IEC C13 outputs give you enough positions for PCs, monitors, and peripherals without the need for additional power strips.
• Two 12V/9Ah batteries provide about 5 min of operation at 50% load, which is a reasonable window for saving and controlled shutdown.
• Operating input range 170-280 VAC ±7% reduces the number of switches to battery during fluctuations in the network.
• Simulated sine wave output is suitable for standard power supplies and office equipment, without paying for a pure sine wave.
• USB slot and Winpower software allow monitoring of the status and automatic shutdown of the systems.
• Built-in surge protection and operation at 50/60Hz protect your equipment under varying network conditions.

Who it is suitable for

This UPS is suitable if you want to protect a gaming/work PC, several lighter machines, or a small office from sudden power outages and surges. It is also good for people who value automated shutdown behavior via USB and software. It is not suitable if you are looking for long autonomy or a system with the possibility of expanding battery capacity.

The combination of 2200VA capacity, 6 IEC outputs, and basic software control via USB makes Powerwalker VI 2200 SH a practical choice if your goal is stability and organized protection, without unnecessary extras and complications.