


UPS POWERWALKER VI 600 STL
- TYPE
- Linear-interactive
- Capacity
- 650 VA
- Capacity
- 600 VA / 360 W
- Control panel
- LCD
- Output voltage shape
- Simulated sine wave
Description
POWERWALKER VI 600 STL is a compact line-interactive UPS, aimed at budget and small home offices, where you need to protect essential equipment from power outages and voltage drops. With a capacity of 650VA and 2 x CEE 7/3 (Type F) Schuko outputs, it is just right for scenarios with 1-2 important devices – computer + monitor, router, NAS or DVR. The simulated sine wave and wide input range of 162–290 VAC help smooth out the unstable grid without interrupting work. The LCD display gives you a quick glance at the UPS status without guessing what is happening.
What you get
The built-in battery 12V/7Ah (one unit) provides up to about 5 minutes of operation at 50% load, which is more than enough to save a project, close applications, and shut down the system in a controlled manner. The output voltage of 230 VAC and frequency stabilization up to ±1Hz in battery mode protect your power supplies from sudden fluctuations. Through the USB port and the PowerMaster software, you can monitor the load, battery level, and set automatic shutdown of the machine in case of power failure. The charging time of 8 hours to 90% means that after a long power outage, the UPS will be ready for operation again by the next evening. Weighing 4.3 kg and lacking the option for additional batteries keeps it compact and easy to position under a desk, next to a router, or in a small cabinet.
- Line-interactive type UPS with a capacity of 650VA, suitable for protecting one desktop computer, small server, or combination PC + monitor.
- Two CEE 7/3 (Type F) Schuko outputs allow you to plug in your equipment directly without the need for adapters or additional power strips.
- Built-in battery 12V/7Ah with one unit inside, sufficient for a short but controlled shutdown when the grid goes down.
- Autonomy of up to 5 minutes at 50% load, giving you time to save files and safely shut down your systems.
- Wide input range of 162–290 VAC and support for 50Hz or 60Hz help for stable operation even under unstable or “dropping” voltage.
- LCD control panel displays key information – battery status, load, and operating mode, so you always know the condition of the UPS.
- USB interface and PowerMaster software provide the option for monitoring and automatic shutdown of the connected computer during prolonged power outages.
- Charging time of 8 hours to 90%, with no option to add additional batteries, making it a simpler and easier-to-use model.
Who it is suitable for
This UPS is a good choice for a home computer, small office, router, modem, IP telephony, or small NAS when you want protection from short interruptions and drops, rather than hours of autonomy. It is also suitable for people who prefer to see information clearly on the LCD, rather than relying solely on audible signals. If you are looking for long operation time under high load or expandability with additional batteries, you will find it limited here.
The most sensible aspect of this model is the combination of 650VA capacity, LCD display, and software control via USB in a compact body, which comfortably meets your daily needs for basic protection of electronics.
Full specifications
- Manufacturer
-
POWERWALKER
- Warranty
- 24 months
- TYPE
- Linear-interactive
- Capacity
- 600 VA / 360 W; 650 VA
- Output connectors
-
2 x CEE 7/3 (Type F) outputs
- Battery model
-
12V/7Ah
- Software
- PowerMaster
- Control panel
- LCD
- Runtime
- 50% load 5 min
- Output voltage shape
- Simulated sine wave
- Input voltage
-
162-290 VAC
- Input connectors
- schuko
- Number of batteries
- 1
- Input frequency
- 50Hz or 60Hz
- Output frequency
- ±1Hz (battery mode)
- Additional batteries
- No ability to add batteries
- Connection slots
-
USB
- Charging time
- 8h to 90%
- Output voltage
-
230 VAC
- Alarm
-
Yes
- Sound signaling
- Yes
- Weight (kg)
- 4.3 kg
- Dimensions
- 286 x 96 x 138 mm
Reviews
No reviews for this product yet. Be the first!