Fans Cougar APOLAR 120 ARGB White (3 fan package) - CG3MAPR12A30002

The Cougar APOLAR 120 ARGB White is a set of three 120 mm case fans, aimed at gaming and modding builds where you want both stable cooling and a clean white design with ARGB. They operate in a wide range of 600 – 2200 RPM, giving you freedom from a quiet work mode to more aggressive airflow under serious load. With an airflow of up to 75.38 CFM and a maximum pressure of 2.59 mm H2O, these fans are great for both front intake and push through denser mesh and filters. Add the addressable RGB lighting on 5 V, and you get a well-balanced set for a modern white configuration.

What you get: three 120 x 120 x 28 mm fans that can spin slowly for minimal noise or ramp up to 2200 RPM when temperatures rise. With a maximum airflow of 75.38 CFM and 2.59 mm H2O pressure, you can effectively “push through” dust filters and front panels without losing much cooling. The Hybrid Bearing is a compromise between long life and lower noise, especially at medium speeds. Via the 4-pin fan connector and a separate 3-pin ADD-RGB 5V for lighting, you easily connect them to a motherboard with an ARGB header and PWM control. The consumption of 0.2 A per fan and 5 V RGB power means you won't seriously overload your motherboard headers or controller.

• A set of 3 x 120 mm fans, which is sufficient for a complete airflow setup at the front or a combination of intake + exhaust.
• A range of 600 – 2200 RPM gives you control from a quiet profile to aggressive cooling at higher temperatures.
• An airflow of up to 75.38 CFM ensures serious air circulation in mid-tower and more open full-tower cases.
• A maximum static pressure of 2.59 mm H2O±10% helps when mounting behind radiators, dust filters, and denser front panels.
• A noise level of up to 37.1 dB, suitable for gaming and work, especially if you set the fan curve reasonably.
• The Hybrid Bearing offers a good balance between durability and smooth operation compared to more basic solutions.
• Addressable RGB lighting with a 3-pin ADD-RGB 5V connector allows synchronization with the motherboard and other ARGB components.
• The white color of the fan housings fits perfectly with white or light cases and builds.
• A 24-month warranty gives you peace of mind for long-term use.

This set is suitable if you are assembling a white gaming or show build and want both stable airflow and synchronized ARGB lighting via 5V ADD-RGB. It is a good option for mid-range cases that need three fans at the front or a combination of front and rear. If you are looking for a completely silent system under any load, keep in mind that at higher RPM, the noise level logically increases.

The most sensible aspect here is the combination of high airflow, decent static pressure, and addressable RGB in a white design, all packed in a convenient 3-pack. With them, you can easily improve both the cooling and the look of the entire configuration.