ADATA HURRICANE 120 ARGB PWM White fan

ADATA HURRICANE 120 ARGB PWM White is a 120 mm case fan aimed at more serious gaming and enthusiast builds, where cooling and aesthetics are equally important. It combines dynamic fluid bearing with addressable RGB lighting, so you get both long life and flexible aesthetics. The operating range of 600 ~ 2000 RPM allows you to balance between noise and airflow depending on the load. The white color makes it particularly suitable for light or themed ARGB builds.

What you get

With an airflow of up to 61.5 CFM and maximum static pressure of 1.42 mm H2O, this fan is a good choice for both general case cooling and for places with more restricted airflow (front intake through filters or dense grilles). The low average noise level of around 18.17 dBA helps your system stay quiet under normal load, especially if you use PWM profiles. The consumption is only 2.4W at 12 V and 0.2A, which is perfectly comfortable for standard fan headers on motherboards. The long cable of 610 mm with daisy-chain capability makes management easier if you plan to use several HURRICANE 120 fans in the front or top of the case.

• Size 120 x 120 x 25 mm – standard form factor that fits almost all modern cases and radiator positions.
• 600 ~ 2000 RPM ± 10% – wide range for quiet operation at idle and more aggressive cooling under load, controlled via PWM.
• Airflow 61.5 CFM ±10% – sufficient flow for effective air renewal in mid-tower and larger cases.
• Max. pressure 1.42 mm H2O ±10% – better performance through dust filters and denser mesh panels compared to low-pressure fans.
• Noise level 18.17 dBA (avg.) – oriented towards quiet operation, especially in combination with properly tuned fan curves.
• Dynamic fluid bearing – extended life and smoother operation, supported by an MTBF of 230,000 hours.
• Addressable RGB lighting – ARGB effects that you can synchronize with the rest of the lighting in the case for a finished look.
• 4-pin connector – standard PWM control for easy integration into the motherboard or fan hub.
• 610mm cable with Daisy-Chain Capable – allows for sequential connection of multiple fans with less cable clutter.
• White color and 24 months warranty – clean aesthetics and peace of mind for reliability.

Who it is suitable for

This fan is suitable if you are building a gaming or enthusiast white configuration with a focus on ARGB and want a good balance between airflow, pressure, and noise. It is suitable for both front intake and exhaust or for dense panels where static pressure helps. If you are looking for an absolutely minimal RPM for ultra-quiet passively oriented systems, you may need a model with an even lower RPM range.

The most sensible aspect of ADATA HURRICANE 120 ARGB PWM White is the combination of decent airflow, quiet fluid bearing, and convenient daisy-chain cable, combined with addressable RGB in an all-white body. You get a fan that is both practical for cooling and easy to integrate into a clean, organized build.