ADATA HURRICANE 140 ARGB PWM Black

ADATA HURRICANE 140 ARGB PWM Black is a 140 mm case fan aimed at more serious gaming and enthusiast configurations, where cooling and aesthetics are equally important. Its large size and airflow of up to 91 CFM mean stable cooling of components even under load. With Addressable RGB lighting, you can synchronize the effects with the other ARGB components in the case. The black housing and 4-pin connector (PWM) complete the picture of a well-balanced fan for a modern build.

What you get

At speeds between 700 ~ 1,800 RPM, you can balance between silence and maximum cooling according to your BIOS or software profile. The airflow of up to 91 CFM and static pressure of up to 2.2 mm H2O allow the fan to perform well even in denser cases with filters and thick mesh panels. The noise level of around 28.1 dBA is a reasonable compromise for this class of 140 mm fans – it won't be silent, but it won't turn into a “turbine” during normal operation. The dynamic fluid bearing ensures a long lifespan, with an MTBF of 230,000 hours meaning years of operation under proper cooling and normal conditions. With a consumption of up to 4.8W and an amperage of up to 0.4A, you can easily fit it into the power budget of the motherboard or fan hub.

• 140 x 140 x 25 mm size provides a larger blade and higher airflow compared to standard 120 mm fans.
• A wide range of 700 ~ 1,800 RPM allows you to set the fan for quiet idle operation and aggressive cooling under load.
• Airflow of up to 91 CFM ±10% is suitable for cases with many components and higher thermal loads.
• Static pressure of up to 2.2 mm H2O ±10% helps when used behind dust filters or dense panels.
• Average noise level of around 28.1 dBA provides a good balance between performance and acoustics.
• Dynamic fluid bearing increases reliability and reduces wear during long-term 24/7 operation.
• Addressable RGB lighting allows fine control of colors and effects through a compatible controller or motherboard.
• 4-pin PWM connector provides precise control of speeds according to system temperature.
• Operation at DC 3.5V～12.6V and consumption of up to 4.8W makes it easy to integrate into most systems.
• 230,000 hours MTBF and 24 months warranty provide peace of mind for long service life.

Who it is suitable for

This fan is suitable if you are building a gaming or enthusiast system and need a 140 mm solution with strong airflow and ARGB aesthetics. It is a good choice for front intake or top exhaust in larger cases where you want serious cooling. If you are looking for an absolutely silent build with very low RPMs, you might also consider models with lower maximum RPM, but here you get significantly more headroom in cooling.

The most sensible aspect of this fan is the combination of high CFM, ARGB lighting, and long bearing life in a 140 mm format. If you want stable cooling and organized RGB aesthetics, the HURRICANE 140 ARGB PWM Black is a logical choice for your case.