ADATA XPG HURRICANE 120mm ARGB PWM Black Fan

ADATA XPG HURRICANE 120mm ARGB PWM Black is a 120 mm case fan aimed at gaming and enthusiast configurations where you want a balance between airflow, noise, and visual effect. It operates with PWM control and offers a wide range of speeds between 600 and 2000 RPM, so you can set it from nearly silent to aggressive cooling. With addressable RGB lighting and a black housing, it fits well with modern ARGB builds. The 4 PIN and 3 pin ADD-RGB 5V connectors give you flexibility when connecting to the motherboard and controlling the lighting.

What you get

With 61.5 CFM airflow and maximum pressure of 1.42 mm H2O, the fan is suitable for both general case ventilation and denser front panels and filters. The range of 600 ~ 2000 RPM allows you to set profiles – low speeds and silence in idle, high speeds under load. The noise level of 18.17 dBA (avg.) is a good indicator of quieter behavior, especially at medium speeds. The dynamic fluid bearing helps for longer life and less noise over time compared to cheaper solutions. With 0.2A (Max) at 12 V, the load on the power supply and motherboard remains low, even if you plan to install several such fans.

• Standard size 120 x 120 x 25 mm, making it compatible with almost all modern PC cases for front, top, or rear mounting.
• Wide range of 600 ~ 2000 RPM ± 10% for flexible choice between silence and maximum cooling depending on the load.
• Airflow up to 61.5 CFM ±10%, sufficient for effectively exhausting warm air or supplying fresh air to the components.
• Maximum pressure 1.42 mm H2O ±10%, which helps in cases with dust filters or more closed panels.
• Average noise level around 18.17 dBA, suitable for a quieter system at reasonable speeds.
• Dynamic fluid bearing (Dynamic Fluid Bearing) for better smoothness, less vibration, and longer life compared to basic bearings.
• Connectors 4 PIN for PWM control and 3 pin ADD-RGB 5V for Addressable RGB lighting, which you can synchronize with other ARGB components.

Who it is suitable for

It is suitable for gaming and RGB builds where you want control over the speeds and addressable lighting without sacrificing decent airflow. If you are assembling a quiet configuration with several fans and looking for a balance between noise and cooling, this model fits well. It is not aimed at extreme overclock scenarios with very high static pressure, but for standard PC cases and gaming systems, it is completely adequate.

The combination of wide RPM range, dynamic fluid bearing, and Addressable RGB makes ADATA XPG HURRICANE 120mm ARGB PWM Black a good choice if you want both control, reliability, and a clean, synchronized ARGB look. You add it to the case and easily adjust both the cooling and the appearance to your taste.