Fan AeroCool Phantom M-3 Infinity Mirror ARGB White Fan 120mm

The AeroCool Phantom M-3 Infinity Mirror ARGB White 120mm fan is a 120 mm cooling fan for cases and radiators, aimed at mid-range gaming and designer builds where looks are almost as important as temperatures. Its white housing and ARGB lighting with an infinity mirror effect immediately catch the eye without sacrificing functionality. With speeds of 500 to 1800 RPM and an airflow of up to 50.2 CFM, you get a balanced combination of cooling and silence. Add the hydraulic bearing for a longer lifespan and lower noise, and you get a fan that looks good in both glass and solid cases.

What you get

At a size of 120 x 120 x 25 mm, the fan is standardly compatible with most cases and 120 mm radiators, so you can easily use it for both intake and exhaust airflow or for water cooling. The range of 500–1800 RPM gives you good flexibility – at lower speeds you keep the system quiet, while at higher speeds you get the full airflow of 50.2 CFM and static pressure of 1.44 mmH2O, which helps with dense mesh panels and radiators. The maximum noise level of 30.8 dBA is reasonable for this class and means it won't buzz unpleasantly during normal gaming or work. Power consumption is modest – up to 3.96 W at 12 V and 0.3 A, so it doesn't strain the power supply or fan headers. The ARGB lighting with a 3 pin ADD-RGB 5V connector and infinity mirror effect allows you to synchronize effects with other components and make the most of the case's glass panel.

• Standard size of 120 x 120 x 25 mm, suitable for both cases and 120 mm radiators, without any strange or non-standard mounting solutions.
• A wide range of 500–1800 RPM, allowing you to balance between quiet operation at idle and more serious cooling under load.
• Airflow of up to 50.2 CFM and static pressure of 1.44 mmH2O, sufficient for effectively exhausting hot air and operating behind filters and radiators.
• Maximum noise level of 30.8 dBA, which keeps the system within comfortable limits even at higher speeds.
• Hydraulic bearing for better durability and lower vibration compared to basic sleeve solutions.
• Dual connector: 4 PIN for the fan and 3 pin ADD-RGB 5V (V-D-NC-G) for addressable RGB, ready for synchronization with the motherboard.
• Addressable RGB with 16.8 million colors and an Infinity Mirror effect for a strong visual accent in a white build.

Who it is suitable for

It is suitable if you are assembling a gaming or show case with a transparent panel and want a fan that cools well but also looks impressive with ARGB and infinity mirror. It is a good choice for white builds, AIO radiators with visible fans, or front intake configurations. If you are looking for a completely silent system at maximum speeds or an industrial level of static pressure, there are more specialized models available.

The strongest aspect of this fan is the combination of decent cooling capacity, a hydraulic bearing, and flashy ARGB infinity mirror lighting in a white housing – a practical upgrade that simultaneously cools and visually completes your build.