Fan AeroCool Phantom M-3R Infinity Mirror ARGB REVERSE Black Fan 120mm

This AeroCool Phantom M-3R is a 120 mm fan with reverse rotation direction and Infinity Mirror ARGB effect – exactly the kind of feature that makes your case look “finished” from the front or the side. It is positioned in the mid-range class: decent airflow, sensible RPMs, and a hydraulic bearing for quieter and longer-lasting operation. It operates in a range of 500–1800 RPM, and the ARGB lighting is addressable at 5V, so you can connect it without hassle to modern motherboards and controllers. The black color and mirror effect make it a good choice for clean, contrast builds.

What you get
In practice, this fan can work both as a quiet case fan at low RPMs and as more serious cooling for a radiator at higher RPMs. With a maximum airflow of 50.2 CFM and static pressure of 1.44 mmH2O, you can place it on a mesh front, or on top of denser radiators or dust filters, without it choking immediately. The hydraulic bearing helps keep noise down to 30.8 dBA, which is reasonable for the 1800 RPM class. Power consumption is low – only 3.96 W at 12 V and 0.3 A, so you won’t overload the fan headers unnecessarily. The reverse rotation direction is convenient if you want to see the blades and ARGB effect from the “good” side, while still blowing in the correct direction for the case airflow.

• 120 mm size – the most popular standard for cases and radiators, easy to combine in most modern chassis.
• RPMs 500–1800 RPM – a wide range, allowing quiet operation in idle and more aggressive cooling under load.
• Airflow 50.2 CFM – sufficient for meaningful air exchange in mid-tower cases or for push/pull configurations.
• Max. pressure 1.44 mmH2O – better performance behind filters, decorative panels, and radiators compared to typical “case-only” fans.
• Noise level 30.8 dBA – balanced between performance and comfort; suitable for gaming and work without an annoying “screaming” sound.
• Hydraulic bearing – greater durability and less mechanical noise compared to cheap sleeve variants.
• 4-pin + 3-pin 5V ADD-RGB connector – easy integration with motherboards and controllers with addressable RGB for lighting synchronization.
• Reverse rotation direction – ideal when you want the blades to “blow” correctly but look good through a glass panel or front mesh.
• 24 months warranty – standard period, providing peace of mind for long-term use.

Who it is suitable for
It is suitable for gamer and enthusiast builds where you want a good balance between cooling and ARGB visuals, especially if you use a glass or mesh panel at the front. It works well both as a case cooler and for a radiator, so it is a lucky choice for air and AIO configurations. If you are chasing an absolutely silent build and often work at maximum RPMs, you might want to limit it via software or through a fan curve.

The combination of reverse design, Infinity Mirror ARGB, and reasonable airflow and noise parameters makes this AeroCool Phantom M-3R a very practical choice if you want your case to look good without sacrificing cooling. A fan that catches the eye and gets the job done.