Fan ARCTIC BioniX P120 Grey/White 120mm - ACFAN00167A

Arctic BioniX P120 is a 120 mm fan aimed at gaming and performance configurations where you want stable airflow without excessive noise. It operates with a wide range of 200 – 2100 RPM, giving you flexibility – from almost silent operation to aggressive cooling when needed. With an airflow of 67.56 CFM and maximum static pressure of 2.75 mm H2O, it is equally suitable for both cases and radiators. The color combination of white and gray makes it a good choice for cleaner or lighter builds.

What you get

This fan is designed to operate efficiently and for a long time. The dynamic fluid bearing provides lower noise and less wear, which is particularly important during long operation in a PC that stays powered on constantly. With a maximum noise of 25 dBA, you can keep high speeds only when you actually need them, thanks to the 4-pin PWM control – the motherboard regulates the speeds according to temperature, instead of the fan running constantly at maximum. The static pressure of 2.75 mm H2O makes it a suitable choice for radiators and dense front panels, where air needs to be pushedthrough filters and slats. The size 120 x 120 x 25 mm and weight 140 g are standard, so installation in most cases and AIO radiators is painless.

• Standard size 120 mm, suitable for almost all modern PC cases and 120/240/360 mm radiators.
• Wide range of speeds 200 – 2100 RPM, allowing quiet operation in idle and aggressive cooling under load.
• Airflow 67.56 CFM, sufficient for building effective front-to-back airflow in your case.
• Maximum static pressure 2.75 mm H2O (@ 2100 RPM), which helps when used on radiators and behind dense dust filters.
• Low noise level up to 25 dBA, so your system remains relatively quiet even at higher speeds.
• 4 Pin PWM connector for automatic speed control through the motherboard or controller, without the need to fix them manually.
• Long warranty of a full 120 months, which shows a focus on reliability and durability.

Who it is suitable for

Arctic BioniX P120 is suitable if you are building a gaming or workstation machine and want a fan that works both as a case fan and on a radiator. It is a good choice if you are looking for a balance between flow, pressure, and noise, without entering extreme modding solutions. If you need an RGB show, this model is unlikely to impress you – the focus here is on practicality and cooling.

The strongest point of this fan is the combination of a wide RPM range, stable static pressure, and long warranty, making it a reliable "workhorse" for almost any build.