Fan ARCTIC BioniX P140 Grey/White 140mm - ACFAN00160A

ARCTIC BioniX P140 Grey/White is a 140 mm fan aimed at gaming and more serious systems, where you want stable cooling without excessive noise. It operates in the range of 200 - 1,950 RPM, providing good control from quiet idle to serious airflow under load. With 77.6 CFM and static pressure of 2.85 mmH2O, it can easily handle denser radiators or tightly closed front panels. The combination of white and grey gives a clean, neutral look that easily fits with most builds.

What you get

With this fan, you get serious airflow that is suitable for both front intake and radiator mounting. The static pressure of 2.85 mmH2O helps air pass through filters and dense fins, instead of returning to the case. Noise levels up to 25 dBA mean that even at higher speeds, the system remains relatively quiet, especially if you set an adequate PWM curve. The dynamic fluid bearing provides longer life and less vibration compared to cheap sleeve solutions, which is important if the machine runs many hours a day. With a 4-pin PWM connector, you can connect the fan directly to the motherboard and control it according to the CPU or system temperature.

• Standard size fan 140 mm, suitable for most modern cases and radiators that support 140 mm fans.
• Operating range 200 - 1,950 RPM, allowing for a very quiet mode at low loads and strong airflow during gaming or rendering.
• Airflow up to 77.6 CFM, sufficient to expel warm air from the case even in more powerful configurations.
• Maximum static pressure 2.85 mmH2O, making the fan a good option for mounting on radiators and behind dense filters.
• Noise level up to 25 dBA, so the system remains quiet with a properly configured PWM profile.
• Dynamic fluid bearing for longer life and lower friction compared to standard sleeve bearings, especially important for 24/7 operation.
• 4 Pin PWM connector and standard 12 V power supply, ensuring full compatibility with modern motherboards.
• Body dimensions 140 x 140 x 28 mm and weight 181 g, providing stability during installation and reducing vibrations.
• Long warranty of a full 120 months, which speaks to confidence in the durability of the bearing and motor.

Who it is suitable for

This fan is a good option if you are building a gaming or work machine and want a balance between cooling and noise without going into extreme RPMs. It is also suitable for AIO or custom water cooling, as long as you use radiators compatible with 140 mm fans. If you are aiming for an entirely silent build at minimal speeds or absolutely need RGB effects, you may want to look for more specialized models.

The combination of strong airflow, decent static pressure, and a long 10-year warranty makes the ARCTIC BioniX P140 a reasonable choice for a serious and long-term upgrade of cooling in the case or on the radiator.